Add a DMA property to the QSPI node Signed-off-by: Geert Uytterhoeven <geert+renesas@xxxxxxxxx> Cc: devicetree@xxxxxxxxxxxxxxx --- This depends on "[PATCH v2 8/8] ARM: shmobile: r8a7791: Add DMAC devices to DT" of series "[PATCH v2 0/8] R-Car Gen2 DMA Controller driver". v2: - Update DMA specifiers to match the renesas,rcar-dmac bindings, v2: - QSPI needs to use 8-bit accesses for DMA, not 32-bit, - Reorder: TX first, RX second. --- arch/arm/boot/dts/r8a7791.dtsi | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index d59af615e365..8186c9f4a18a 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -1044,6 +1044,8 @@ reg = <0 0xe6b10000 0 0x2c>; interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; clocks = <&mstp9_clks R8A7791_CLK_QSPI_MOD>; + dmas = <&dmac0 0x17>, <&dmac0 0x18>; + dma-names = "tx", "rx"; num-cs = <1>; #address-cells = <1>; #size-cells = <0>; -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
