[PATCH 2/2] leds: pca955x: Allow zero LEDs to be specified

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



It's valid to use the PCA955x devices just for GPIOs and not for LEDs.
In this case, as PCA955X_TYPE_GPIO is now equivalent to
PCA955X_TYPE_NONE, remove the test for whether we have any child nodes
specified in the devicetree.

A consequence of this is it's now possible to bind the driver to a
PCA955x device when dynamically instantiated through the I2C subsystem's
`new_device` interface.

Signed-off-by: Andrew Jeffery <andrew@xxxxxxxx>
---
 drivers/leds/leds-pca955x.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/leds/leds-pca955x.c b/drivers/leds/leds-pca955x.c
index 77c0f461ab95..81aaf21212d7 100644
--- a/drivers/leds/leds-pca955x.c
+++ b/drivers/leds/leds-pca955x.c
@@ -429,7 +429,7 @@ pca955x_get_pdata(struct i2c_client *client, struct pca955x_chipdef *chip)
 	int count;
 
 	count = device_get_child_node_count(&client->dev);
-	if (!count || count > chip->bits)
+	if (count > chip->bits)
 		return ERR_PTR(-ENODEV);
 
 	pdata = devm_kzalloc(&client->dev, sizeof(*pdata), GFP_KERNEL);
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux