Re: [PATCH v3 00/47] TI AM437X ADC1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Lee,

miquel.raynal@xxxxxxxxxxx wrote on Wed, 15 Sep 2021 17:58:21 +0200:

> Hello,
> 
> This is a (fairly big) series bringing support of AM437X ADC1.
> On TI AM33XX SoCs family there is an ADC that can also be connected to a
> touchscreen. This hardware has been extended and is present on certain
> SoCs from the AM437X family. In particular, the touchscreen has been
> replaced by a magnetic card reader. In both cases, the representation is
> an MFD device with two children:
> * on AM33XX: the touchscreen controller and the ADC
> * on AM437X: the magnetic card reader and the ADC
> 
> This series really targets small and atomic changes so that the overall
> review is eased, even though it leads to a lot of rather small patches.
> Here are the steps:
> * Supporting the missing clock
> * Translating a single text file containing the description for the
>   MFD, the touchscreen and the ADC into three independent yaml files.
> * Cleaning/preparing the MFD driver.
> * Supporting ADC1 in the MFD driver.
> * Cleaning/preparing of the ADC driver.
> * Supporting ADC1 in the ADC driver.
> * Updating various device trees.
> 
> Here is the full series again, almost reviewed and acked entirely, but
> rebased on the last -rc1. The clock patch has been acked, the ADC
> patches as well, so we expect the series to go through the MFD
> tree if hte maintainers agree with it.

Lee, I would welcome your feedback about this big series. I received
the acknowledgment of:
* Stephen for the clock patch
* Jonathan and Rob for the binding patches
* Jonathan for the IIO patches
* Jonathan again for the MFD patches

There is currently only one issue left: I should reorder 28/47 before
26/47 and change the commit message of patch 27/47.

If this is fine for you I would like to:
* let you pick patches from 1 to 25 of v3
* I will send a v4 with only three patches: 26, 27, 28 with Jonathan's
  last comments addressed.
* Finally you could take the remaining patches of v3 up to patch 44 (the
  last 3 are DT patches).

Would this work for you? If possible I would like to avoid resending
the entire series once again. Unless of course you have additional
comments which I will obviously address.

Thanks,
Miquèl

> Changes in v3:
> * Rebased on top of v5.15-rc1.
> * R-by/A-by tags added.
> * Light reordering to let the of_put_node() fix to be applied more easily
> * Dropped a patch made useless because of the previous reordering
> * Explained how the tscadc->ctrl variable was used.
> * Fixed a couple of typos.
> * Included the change for the HZ macro.
> * Went further in the BIT()/FIELD_PREP() cleanup.
> * Added maximum definitions for sample delay/open delay.
> * Removed useless definitions.
> * Fixed a couple of rebase conflicts (the series was not bisectable).
> 
> Changes in v2:
> * Added various R-by/A-by tags.
> * Various typos & style fixes.
> [Bindings]
> * Included the missing ti,am654-tscadc compatible.
> * Reworded the compatible lines as requested by Jonathan.
> * Reworded the bindings content a little bit as advised by Rob (subnodes
>   being objects, MFD descriptions provided once, status and unused
>   labels removed).
> [SPDX changes]
> * Mentioned that the license macro and the license text matched.
> * Also added an SPDX tag in the MFD header.
> [MFD header]
> * Used the BIT(), GENMASK() and PREP_FIELD() macros when relevant.
> [MFD driver]
> * Did not reordered the variables declared on the probe stack as advised
>   by Jonathan.
> * Added missing of_node_put() calls.
> * Moved the patch changing the place where the main structure is
>   allocated to directly precede the patch using this change.
> * Fixed the driver data wiring (bug happening between ex patches 16 and
>   28).
> * Added a commit just to explain the reordering of the register writes
>   during initialization/resume.
> * Explained the check about 'use_tsc' in the commit message.
> * Added a link to the TRM in a commit message referencing it.
> * Removed the use of the ti,tracks property, used a constant value
>   instead.
> * Dropped the error check when retrieving the "wrong" DT property
>   (coordiante-readouts) which is unused.
> 
> 
> Miquel Raynal (47):
>   clk: ti: am43xx: Add clkctrl data for am43xx ADC1
>   dt-bindings: mfd: ti,am3359-tscadc: Add a yaml description for this
>     MFD
>   dt-bindings: touchscreen: ti,am3359-tsc: New yaml description
>   dt-bindings: iio: adc: ti,am3359-adc: New yaml description
>   dt-bindings: touchscreen: ti,am3359-tsc: Remove deprecated text file
>   dt-bindings: mfd: ti,am3359-tscadc: Describe am4372 MFD compatible
>   dt-bindings: iio: adc: ti,am3359-adc: Describe am4372 ADC compatible
>   mfd: ti_am335x_tscadc: Ensure a balanced number of node get/put
>   mfd: ti_am335x_tscadc: Replace license text with SPDX tag
>   mfd: ti_am335x_tscadc: Fix style
>   mfd: ti_am335x_tscadc: Drop extra spacing when declaring stack
>     variables
>   mfd: ti_am335x_tscadc: Get rid of useless gotos
>   mfd: ti_am335x_tscadc: Reword the comment explaining the dividers
>   mfd: ti_am335x_tscadc: Don't search the tree for our clock
>   mfd: ti_am335x_tscadc: Simplify divisor calculation
>   mfd: ti_am335x_tscadc: Move the driver structure allocation earlier
>   mfd: ti_am335x_tscadc: Use driver data
>   mfd: ti_am335x_tscadc: Mimic the probe from resume()
>   mfd: ti_am335x_tscadc: Drop useless variables from the driver
>     structure
>   mfd: ti_am335x_tscadc: Always provide an idle configuration
>   mfd: ti_am335x_tscadc: Reorder the initialization steps
>   mfd: ti_am335x_tscadc: Gather the ctrl register logic in one place
>   mfd: ti_am335x_tscadc: Replace the header license text with SPDX tag
>   mfd: ti_am335x_tscadc: Fix header spacing
>   mfd: ti_am335x_tscadc: Use the new HZ_PER_MHZ macro
>   mfd: ti_am335x_tscadc: Use BIT(), GENMASK() and FIELD_PREP() when
>     relevant
>   mfd: ti_am335x_tscadc: Clarify the maximum values for DT entries
>   mfd: ti_am335x_tscadc: Drop useless definitions from the header
>   mfd: ti_am335x_tscadc: Rename the subsystem enable macro
>   mfd: ti_am335x_tscadc: Add TSC prefix in certain macros
>   mfd: ti_am335x_tscadc: Rename a variable
>   mfd: ti_am335x_tscadc: Fix an error message
>   mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a
>     touchscreen
>   mfd: ti_am335x_tscadc: Introduce has_tsc
>   mfd: ti_am335x_tscadc: Add ADC1/magnetic reader support
>   mfd: ti_am335x_tscadc: Support the correctly spelled DT property
>   iio: adc: ti_am335x_adc: Wait the idle state to avoid stalls
>   iio: adc: ti_am335x_adc: Replace license text with SPDX tag
>   iio: adc: ti_am335x_adc: Fix style
>   iio: adc: ti_am335x_adc: Get rid of useless gotos
>   iio: adc: ti_am335x_adc: Gather the checks on the delays
>   iio: adc: ti_am335x_adc: Add a unit to the timeout delay
>   iio: adc: ti_am335x_adc: Add the scale information
>   iio: adc: ti_am335x_adc: Add the am437x compatible
>   ARM: dts: am437x-cm-t43: Use a correctly spelled DT property
>   ARM: dts: am43xx: Describe the magnetic reader/ADC1 hardware module
>   ARM: dts: am437x-gp-evm: enable ADC1
> 
>  .../bindings/iio/adc/ti,am3359-adc.yaml       |  70 +++++
>  .../input/touchscreen/ti,am3359-tsc.yaml      |  76 ++++++
>  .../bindings/input/touchscreen/ti-tsc-adc.txt |  91 -------
>  .../bindings/mfd/ti,am3359-tscadc.yaml        |  84 ++++++
>  arch/arm/boot/dts/am437x-cm-t43.dts           |   2 +-
>  arch/arm/boot/dts/am437x-gp-evm.dts           |   8 +
>  arch/arm/boot/dts/am437x-l4.dtsi              |  31 ++-
>  arch/arm/boot/dts/am43xx-clocks.dtsi          |   7 +
>  drivers/clk/ti/clk-43xx.c                     |   1 +
>  drivers/iio/adc/ti_am335x_adc.c               | 220 +++++++++-------
>  drivers/mfd/ti_am335x_tscadc.c                | 243 ++++++++++--------
>  include/dt-bindings/clock/am4.h               |   1 +
>  include/linux/mfd/ti_am335x_tscadc.h          | 115 ++++-----
>  13 files changed, 599 insertions(+), 350 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/ti,am3359-adc.yaml
>  create mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti,am3359-tsc.yaml
>  delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/ti-tsc-adc.txt
>  create mode 100644 Documentation/devicetree/bindings/mfd/ti,am3359-tscadc.yaml
> 




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux