On the SC7280, the clock source for gcc_pcie_1_pipe_clk_src must be the TCXO while gdsc is enabled. After PHY init successful clock source should switch to pipe clock for gcc_pcie_1_pipe_clk_src. Signed-off-by: Prasad Malisetty <pmaliset@xxxxxxxxxxxxxx> --- drivers/pci/controller/dwc/pcie-qcom.c | 90 +++++++++++++++++++++++++++++----- 1 file changed, 79 insertions(+), 11 deletions(-) diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 8a7a300..6811db6 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -166,6 +166,9 @@ struct qcom_pcie_resources_2_7_0 { struct regulator_bulk_data supplies[2]; struct reset_control *pci_reset; struct clk *pipe_clk; + struct clk *pipe_clk_src; + struct clk *phy_pipe_clk; + struct clk *ref_clk_src; }; union qcom_pcie_resources { @@ -189,6 +192,11 @@ struct qcom_pcie_ops { int (*config_sid)(struct qcom_pcie *pcie); }; +struct qcom_pcie_cfg { + const struct qcom_pcie_ops *ops; + unsigned int pipe_clk_need_muxing:1; +}; + struct qcom_pcie { struct dw_pcie *pci; void __iomem *parf; /* DT parf */ @@ -197,6 +205,7 @@ struct qcom_pcie { struct phy *phy; struct gpio_desc *reset; const struct qcom_pcie_ops *ops; + unsigned int pipe_clk_need_muxing:1; }; #define to_qcom_pcie(x) dev_get_drvdata((x)->dev) @@ -1167,6 +1176,20 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie) if (ret < 0) return ret; + if (pcie->pipe_clk_need_muxing) { + res->pipe_clk_src = devm_clk_get(dev, "pipe_mux"); + if (IS_ERR(res->pipe_clk_src)) + return PTR_ERR(res->pipe_clk_src); + + res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe"); + if (IS_ERR(res->phy_pipe_clk)) + return PTR_ERR(res->phy_pipe_clk); + + res->ref_clk_src = devm_clk_get(dev, "ref"); + if (IS_ERR(res->ref_clk_src)) + return PTR_ERR(res->ref_clk_src); + } + res->pipe_clk = devm_clk_get(dev, "pipe"); return PTR_ERR_OR_ZERO(res->pipe_clk); } @@ -1185,6 +1208,10 @@ static int qcom_pcie_init_2_7_0(struct qcom_pcie *pcie) return ret; } + /* Set TCXO as clock source for pcie_pipe_clk_src */ + if (pcie->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->ref_clk_src); + ret = clk_bulk_prepare_enable(res->num_clks, res->clks); if (ret < 0) goto err_disable_regulators; @@ -1256,6 +1283,10 @@ static int qcom_pcie_post_init_2_7_0(struct qcom_pcie *pcie) { struct qcom_pcie_resources_2_7_0 *res = &pcie->res.v2_7_0; + /* Set pipe clock as clock source for pcie_pipe_clk_src */ + if (pcie->pipe_clk_need_muxing) + clk_set_parent(res->pipe_clk_src, res->phy_pipe_clk); + return clk_prepare_enable(res->pipe_clk); } @@ -1456,6 +1487,39 @@ static const struct qcom_pcie_ops ops_1_9_0 = { .config_sid = qcom_pcie_config_sid_sm8250, }; +static const struct qcom_pcie_cfg apq8084_cfg = { + .ops = &ops_1_0_0, +}; + +static const struct qcom_pcie_cfg ipq8064_cfg = { + .ops = &ops_2_1_0, +}; + +static const struct qcom_pcie_cfg msm8996_cfg = { + .ops = &ops_2_3_2, +}; + +static const struct qcom_pcie_cfg ipq8074_cfg = { + .ops = &ops_2_3_3, +}; + +static const struct qcom_pcie_cfg ipq4019_cfg = { + .ops = &ops_2_4_0, +}; + +static const struct qcom_pcie_cfg sdm845_cfg = { + .ops = &ops_2_7_0, +}; + +static const struct qcom_pcie_cfg sm8250_cfg = { + .ops = &ops_1_9_0, +}; + +static const struct qcom_pcie_cfg sc7280_cfg = { + .ops = &ops_1_9_0, + .pipe_clk_need_muxing = true, +}; + static const struct dw_pcie_ops dw_pcie_ops = { .link_up = qcom_pcie_link_up, .start_link = qcom_pcie_start_link, @@ -1467,6 +1531,7 @@ static int qcom_pcie_probe(struct platform_device *pdev) struct pcie_port *pp; struct dw_pcie *pci; struct qcom_pcie *pcie; + const struct qcom_pcie_cfg *pcie_cfg; int ret; pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL); @@ -1488,7 +1553,9 @@ static int qcom_pcie_probe(struct platform_device *pdev) pcie->pci = pci; - pcie->ops = of_device_get_match_data(dev); + pcie_cfg = of_device_get_match_data(dev); + pcie->ops = pcie_cfg->ops; + pcie->pipe_clk_need_muxing = pcie_cfg->pipe_clk_need_muxing; pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_HIGH); if (IS_ERR(pcie->reset)) { @@ -1545,16 +1612,17 @@ static int qcom_pcie_probe(struct platform_device *pdev) } static const struct of_device_id qcom_pcie_match[] = { - { .compatible = "qcom,pcie-apq8084", .data = &ops_1_0_0 }, - { .compatible = "qcom,pcie-ipq8064", .data = &ops_2_1_0 }, - { .compatible = "qcom,pcie-ipq8064-v2", .data = &ops_2_1_0 }, - { .compatible = "qcom,pcie-apq8064", .data = &ops_2_1_0 }, - { .compatible = "qcom,pcie-msm8996", .data = &ops_2_3_2 }, - { .compatible = "qcom,pcie-ipq8074", .data = &ops_2_3_3 }, - { .compatible = "qcom,pcie-ipq4019", .data = &ops_2_4_0 }, - { .compatible = "qcom,pcie-qcs404", .data = &ops_2_4_0 }, - { .compatible = "qcom,pcie-sdm845", .data = &ops_2_7_0 }, - { .compatible = "qcom,pcie-sm8250", .data = &ops_1_9_0 }, + { .compatible = "qcom,pcie-apq8084", .data = &apq8084_cfg }, + { .compatible = "qcom,pcie-ipq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-ipq8064-v2", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-apq8064", .data = &ipq8064_cfg }, + { .compatible = "qcom,pcie-msm8996", .data = &msm8996_cfg }, + { .compatible = "qcom,pcie-ipq8074", .data = &ipq8074_cfg }, + { .compatible = "qcom,pcie-ipq4019", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-qcs404", .data = &ipq4019_cfg }, + { .compatible = "qcom,pcie-sdm845", .data = &sdm845_cfg }, + { .compatible = "qcom,pcie-sm8250", .data = &sm8250_cfg }, + { .compatible = "qcom,pcie-sc7280", .data = &sc7280_cfg }, { } }; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project