On Fri, Sep 17, 2021 at 04:15:36PM +0530, Satya Priya wrote: > + properties: > + reg: > + maxItems: 1 > + regulator-name: true > + regulator-min-microvolt: true > + regulator-max-microvolt: true You shouldn't be forcing these properties, it should be perfectly OK for boards to have fixed voltages especially for example during bringup or for debugging. > + qcom,min-dropout-voltage: > + $ref: /schemas/types.yaml#/definitions/uint32 > + description: > + Specifies the minimum voltage in microvolts that the parent > + supply regulator must output, above the output of this > + regulator. If this is needed in DT it should be a generic property since most regulators have some requirement here however usually it's a fixed property of the silicon and should therefore just gets set in the regulator_desc as min_dropout_uV - I'd strongly recommend having a default there even if there's some requirement for it to be set per board.
Attachment:
signature.asc
Description: PGP signature
