This patch set adds support for the UART found in Mediatek SoCs. The chip is a changed version of a 8250 controller. Especially it introduces a new register called highspeed. The value in this register has to be set depending on the baudrate. The value in the register influences the way the divisor has to be calculated. The patch series is build against v3.16-rc1 and tested on mt6589. Should work as well on mt6577 and mt6582. Thanks, Matthias Matthias Brugger (3): tty: serial: 8250: Add new capability for highspeed register tty: serial: 8250: Add Mediatek UART driver DTS: serial: Add bindings documention for the Mediatek UARTs .../devicetree/bindings/serial/mtk-uart.txt | 19 ++ drivers/tty/serial/8250/8250.h | 1 + drivers/tty/serial/8250/8250_core.c | 47 +++++ drivers/tty/serial/8250/8250_mtk.c | 211 ++++++++++++++++++++ drivers/tty/serial/8250/Kconfig | 7 + drivers/tty/serial/8250/Makefile | 1 + include/uapi/linux/serial_reg.h | 6 + 7 files changed, 292 insertions(+) create mode 100644 Documentation/devicetree/bindings/serial/mtk-uart.txt create mode 100644 drivers/tty/serial/8250/8250_mtk.c -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html