On Wed, 15 Sept 2021 at 21:05, Chanwoo Choi <cwchoi00@xxxxxxxxx> wrote:
>
> Hi Sam,
>
> On 21. 9. 15. 오전 12:56, Sam Protsenko wrote:
> > This is the initial implementation adding only basic clocks like UART,
> > MMC, I2C and corresponding parent clocks. Design is influenced by
> > Exynos7 and Exynos5433 clock drivers.
> >
> > Signed-off-by: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> > ---
> > drivers/clk/samsung/Makefile | 1 +
> > drivers/clk/samsung/clk-exynos850.c | 700 ++++++++++++++++++++++++++++
> > 2 files changed, 701 insertions(+)
> > create mode 100644 drivers/clk/samsung/clk-exynos850.c
> >
> > diff --git a/drivers/clk/samsung/Makefile b/drivers/clk/samsung/Makefile
> > index 028b2e27a37e..c46cf11e4d0b 100644
> > --- a/drivers/clk/samsung/Makefile
> > +++ b/drivers/clk/samsung/Makefile
> > @@ -17,6 +17,7 @@ obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos5433.o
> > obj-$(CONFIG_EXYNOS_AUDSS_CLK_CON) += clk-exynos-audss.o
> > obj-$(CONFIG_EXYNOS_CLKOUT) += clk-exynos-clkout.o
> > obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos7.o
> > +obj-$(CONFIG_EXYNOS_ARM64_COMMON_CLK) += clk-exynos850.o
> > obj-$(CONFIG_S3C2410_COMMON_CLK)+= clk-s3c2410.o
> > obj-$(CONFIG_S3C2410_COMMON_DCLK)+= clk-s3c2410-dclk.o
> > obj-$(CONFIG_S3C2412_COMMON_CLK)+= clk-s3c2412.o
> > diff --git a/drivers/clk/samsung/clk-exynos850.c b/drivers/clk/samsung/clk-exynos850.c
> > new file mode 100644
> > index 000000000000..1028caa2102e
> > --- /dev/null
> > +++ b/drivers/clk/samsung/clk-exynos850.c
> > @@ -0,0 +1,700 @@
> > +// SPDX-License-Identifier: GPL-2.0-only
> > +/*
> > + * Copyright (C) 2021 Linaro Ltd.
> > + * Author: Sam Protsenko <semen.protsenko@xxxxxxxxxx>
> > + *
> > + * Common Clock Framework support for Exynos850 SoC.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/of.h>
> > +#include <linux/of_address.h>
> > +
> > +#include <dt-bindings/clock/exynos850.h>
> > +
> > +#include "clk.h"
> > +
> > +/* Gate register bits */
> > +#define GATE_MANUAL BIT(20)
> > +#define GATE_ENABLE_HWACG BIT(28)
> > +
> > +/* Gate register offsets range */
> > +#define GATE_OFF_START 0x2000
> > +#define GATE_OFF_END 0x2fff
> > +
> > +/**
> > + * exynos850_init_clocks - Set clocks initial configuration
> > + * @np: CMU device tree node with "reg" property (CMU addr)
> > + * @reg_offs: Register offsets array for clocks to init
> > + * @reg_offs_len: Number of register offsets in reg_offs array
> > + *
> > + * Set manual control mode for all gate clocks.
> > + */
> > +static void __init exynos850_init_clocks(struct device_node *np,
> > + const unsigned long *reg_offs, size_t reg_offs_len)
> > +{
> > + const __be32 *regaddr_p;
> > + u64 regaddr;
> > + u32 base;
> > + size_t i;
> > +
> > + /* Get the base address ("reg" property in dts) */
> > + regaddr_p = of_get_address(np, 0, NULL, NULL);
> > + if (!regaddr_p)
> > + panic("%s: failed to get reg regaddr\n", __func__);
> > +
> > + regaddr = of_translate_address(np, regaddr_p);
> > + if (regaddr == OF_BAD_ADDR || !regaddr)
> > + panic("%s: bad reg regaddr\n", __func__);
> > +
> > + base = (u32)regaddr;
> > +
> > + for (i = 0; i < reg_offs_len; ++i) {
> > + void __iomem *reg;
> > + u32 val;
> > +
> > + /* Modify only gate clock registers */
> > + if (reg_offs[i] < GATE_OFF_START || reg_offs[i] > GATE_OFF_END)
> > + continue; > +
> > + reg = ioremap(base + reg_offs[i], 4);
> > + val = ioread32(reg);
> > + val |= GATE_MANUAL;
> > + val &= ~GATE_ENABLE_HWACG;
> > + iowrite32(val, reg);
> > + iounmap(reg);
>
> I understand your intention for disabling HWACG.
> But, it is not good to execute ioreamp/iounmap for each clock gate
> register. I think that we need to consider the more pretty method
> to initialize the clock register before clock registration.
>
> [snip]
>
Hi guys,
Thanks for the quick review! I'll address all your comments once I get
back from vacation (in two weeks), and will send v2.
> --
> Best Regards,
> Samsung Electronics
> Chanwoo Choi
