Convert the Cadence CSI2RX binding to use YAML schema. Signed-off-by: Pratyush Yadav <p.yadav@xxxxxx> --- Changes in v4: - Add power-domains property. - Drop maxItems from clock-names. - Drop the type for data-lanes. - Drop uniqueItems from data-lanes. Move it to video-interfaces.yaml instead. Changes in v3: - Add compatible: contains: const: cdns,csi2rx to allow SoC specific compatible. - Add more constraints for data-lanes property. Changes in v2: - New in v2. .../devicetree/bindings/media/cdns,csi2rx.txt | 100 ----------- .../bindings/media/cdns,csi2rx.yaml | 169 ++++++++++++++++++ 2 files changed, 169 insertions(+), 100 deletions(-) delete mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.txt create mode 100644 Documentation/devicetree/bindings/media/cdns,csi2rx.yaml diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt b/Documentation/devicetree/bindings/media/cdns,csi2rx.txt deleted file mode 100644 index 6b02a0657ad9..000000000000 --- a/Documentation/devicetree/bindings/media/cdns,csi2rx.txt +++ /dev/null @@ -1,100 +0,0 @@ -Cadence MIPI-CSI2 RX controller -=============================== - -The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI -lanes in input, and 4 different pixel streams in output. - -Required properties: - - compatible: must be set to "cdns,csi2rx" and an SoC-specific compatible - - reg: base address and size of the memory mapped region - - clocks: phandles to the clocks driving the controller - - clock-names: must contain: - * sys_clk: main clock - * p_clk: register bank clock - * pixel_if[0-3]_clk: pixel stream output clock, one for each stream - implemented in hardware, between 0 and 3 - -Optional properties: - - phys: phandle to the external D-PHY, phy-names must be provided - - phy-names: must contain "dphy", if the implementation uses an - external D-PHY - -Required subnodes: - - ports: A ports node with one port child node per device input and output - port, in accordance with the video interface bindings defined in - Documentation/devicetree/bindings/media/video-interfaces.txt. The - port nodes are numbered as follows: - - Port Description - ----------------------------- - 0 CSI-2 input - 1 Stream 0 output - 2 Stream 1 output - 3 Stream 2 output - 4 Stream 3 output - - The stream output port nodes are optional if they are not - connected to anything at the hardware level or implemented - in the design.Since there is only one endpoint per port, - the endpoints are not numbered. - - -Example: - -csi2rx: csi-bridge@0d060000 { - compatible = "cdns,csi2rx"; - reg = <0x0d060000 0x1000>; - clocks = <&byteclock>, <&byteclock> - <&coreclock>, <&coreclock>, - <&coreclock>, <&coreclock>; - clock-names = "sys_clk", "p_clk", - "pixel_if0_clk", "pixel_if1_clk", - "pixel_if2_clk", "pixel_if3_clk"; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - csi2rx_in_sensor: endpoint { - remote-endpoint = <&sensor_out_csi2rx>; - clock-lanes = <0>; - data-lanes = <1 2>; - }; - }; - - port@1 { - reg = <1>; - - csi2rx_out_grabber0: endpoint { - remote-endpoint = <&grabber0_in_csi2rx>; - }; - }; - - port@2 { - reg = <2>; - - csi2rx_out_grabber1: endpoint { - remote-endpoint = <&grabber1_in_csi2rx>; - }; - }; - - port@3 { - reg = <3>; - - csi2rx_out_grabber2: endpoint { - remote-endpoint = <&grabber2_in_csi2rx>; - }; - }; - - port@4 { - reg = <4>; - - csi2rx_out_grabber3: endpoint { - remote-endpoint = <&grabber3_in_csi2rx>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml new file mode 100644 index 000000000000..fbd7f0503832 --- /dev/null +++ b/Documentation/devicetree/bindings/media/cdns,csi2rx.yaml @@ -0,0 +1,169 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/cdns,csi2rx.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Cadence MIPI-CSI2 RX controller + +description: | + The Cadence MIPI-CSI2 RX controller is a CSI-2 bridge supporting up to 4 CSI + lanes in input, and 4 different pixel streams in output. + +maintainers: + - Pratyush Yadav <p.yadav@xxxxxx> + +properties: + compatible: + contains: + const: cdns,csi2rx + + reg: + maxItems: 1 + + clocks: + minItems: 3 + maxItems: 6 + + clock-names: + minItems: 3 + items: + - const: sys_clk # main clock + - const: p_clk # register bank clock + - const: pixel_if0_clk # pixel stream 0 output clock + - const: pixel_if1_clk # pixel stream 1 output clock + - const: pixel_if2_clk # pixel stream 2 output clock + - const: pixel_if3_clk # pixel stream 3 output clock + + phys: + maxItems: 1 + description: phandle to the external D-PHY + + phy-names: + items: + - const: dphy + + power-domains: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + unevaluatedProperties: false + description: CSI-2 input + + properties: + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + clock-lanes: + maxItems: 1 + + data-lanes: + minItems: 1 + maxItems: 4 + items: + maximum: 4 + + required: + - clock-lanes + - data-lanes + + port@1: + $ref: /schemas/graph.yaml#/properties/port + description: Stream 0 output + + port@2: + $ref: /schemas/graph.yaml#/properties/port + description: Stream 1 output + + port@3: + $ref: /schemas/graph.yaml#/properties/port + description: Stream 2 output + + port@4: + $ref: /schemas/graph.yaml#/properties/port + description: Stream 3 output + + required: + - port@0 + + +dependencies: + phys: [ 'phy-names' ] + phy-names: [ 'phys' ] + +required: + - compatible + - reg + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + csi2rx: csi-bridge@d060000 { + compatible = "cdns,csi2rx"; + reg = <0x0d060000 0x1000>; + clocks = <&byteclock>, <&byteclock>, + <&coreclock>, <&coreclock>, + <&coreclock>, <&coreclock>; + clock-names = "sys_clk", "p_clk", + "pixel_if0_clk", "pixel_if1_clk", + "pixel_if2_clk", "pixel_if3_clk"; + phys = <&dphy0>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + + csi2rx_in_sensor: endpoint { + remote-endpoint = <&sensor_out_csi2rx>; + clock-lanes = <0>; + data-lanes = <1 2>; + }; + }; + + port@1 { + reg = <1>; + + csi2rx_out_grabber0: endpoint { + remote-endpoint = <&grabber0_in_csi2rx>; + }; + }; + + port@2 { + reg = <2>; + + csi2rx_out_grabber1: endpoint { + remote-endpoint = <&grabber1_in_csi2rx>; + }; + }; + + port@3 { + reg = <3>; + + csi2rx_out_grabber2: endpoint { + remote-endpoint = <&grabber2_in_csi2rx>; + }; + }; + + port@4 { + reg = <4>; + + csi2rx_out_grabber3: endpoint { + remote-endpoint = <&grabber3_in_csi2rx>; + }; + }; + }; + }; -- 2.33.0