Hi Jonathan,
jic23@xxxxxxxxxx wrote on Sun, 5 Sep 2021 14:13:32 +0100:
> On Thu, 2 Sep 2021 23:51:24 +0200
> Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
>
> > Use the FIELD_PREP() macro when relevant. Sometimes reorder the lines to
> > be able to use the relevant bitmask.
> >
> > Mind the s/%d/%ld/ change in a log due to the type change following the
> > use of FIELD_PREP() in the header.
> >
> > Suggested-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> > Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> What you have here is fine, but I would take it a step further and push the
> FIELD_PREP() calls directly inline in the code. There is little advantage
> beyond saving a few characters in
>
> STEPENB(3)
>
> rather than
>
> FIELD_PREP(STEPENB_MASK, 3)
>
> If you don't want to go that far this is still an improvement so
> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
>
> > ---
> > drivers/iio/adc/ti_am335x_adc.c | 2 +-
> > include/linux/mfd/ti_am335x_tscadc.h | 31 ++++++++++++++--------------
> > 2 files changed, 17 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/iio/adc/ti_am335x_adc.c b/drivers/iio/adc/ti_am335x_adc.c
> > index e946903b0993..54c410b6ca07 100644
> > --- a/drivers/iio/adc/ti_am335x_adc.c
> > +++ b/drivers/iio/adc/ti_am335x_adc.c
> > @@ -126,7 +126,7 @@ static void tiadc_step_config(struct iio_dev *indio_dev)
> > chan = adc_dev->channel_line[i];
> >
> > if (adc_dev->step_avg[i] > STEPCONFIG_AVG_16) {
> > - dev_warn(dev, "chan %d step_avg truncating to %d\n",
> > + dev_warn(dev, "chan %d step_avg truncating to %ld\n",
> > chan, STEPCONFIG_AVG_16);
> > adc_dev->step_avg[i] = STEPCONFIG_AVG_16;
> > }
> > diff --git a/include/linux/mfd/ti_am335x_tscadc.h b/include/linux/mfd/ti_am335x_tscadc.h
> > index 4de16fc3d74f..29095c0dc6d8 100644
> > --- a/include/linux/mfd/ti_am335x_tscadc.h
> > +++ b/include/linux/mfd/ti_am335x_tscadc.h
> > @@ -8,6 +8,7 @@
> > #ifndef __LINUX_TI_AM335X_TSCADC_MFD_H
> > #define __LINUX_TI_AM335X_TSCADC_MFD_H
> >
> > +#include <linux/bitfield.h>
> > #include <linux/mfd/core.h>
> >
> > #define REG_RAWIRQSTATUS 0x024
> > @@ -40,7 +41,7 @@
> >
> > /* Step Enable */
> > #define STEPENB_MASK GENMASK(16, 0)
> > -#define STEPENB(val) ((val) << 0)
> > +#define STEPENB(val) FIELD_PREP(STEPENB_MASK, (val))
>
> My inclination with these is to drop the macro entirely and
> just use FIELD_PREP(STEPENB_MASK, xxx) inline directly.
> There is no loss of clarity in doing so and it gets you to a state
> where you only have one macro per field which is nice for checking
> purposes.
Actually I don't like too much leaking FIELD_PREP()s directly in the
code because (and this is really a personal feeling) I found them
rather less straightforward to understand than a good old BIT() for
example. Moreover, I've already hacked in a lot of different
places and moving these definitions in the code directly would
produce a big diff, overall hardening possible future git-blames.
However, I rather agree on the fact that there is no point in defining
a mask and then using that mask in another macro unless that mask is
reused somewhere else. So if it's fine for you, I'll provide a new
version with a reduced number of defines in this file. Would this work
for you?
>
> > #define ENB(val) BIT(val)
> > #define STPENB_STEPENB STEPENB(GENMASK(16, 0))
> > #define STPENB_STEPENB_TC STEPENB(GENMASK(12, 0))
> > @@ -58,11 +59,11 @@
> >
> > /* Step Configuration */
> > #define STEPCONFIG_MODE_MASK GENMASK(1, 0)
> > -#define STEPCONFIG_MODE(val) ((val) << 0)
> > +#define STEPCONFIG_MODE(val) FIELD_PREP(STEPCONFIG_MODE_MASK, (val))
> > #define STEPCONFIG_MODE_SWCNT STEPCONFIG_MODE(1)
> > #define STEPCONFIG_MODE_HWSYNC STEPCONFIG_MODE(2)
> > #define STEPCONFIG_AVG_MASK GENMASK(4, 2)
> > -#define STEPCONFIG_AVG(val) ((val) << 2)
> > +#define STEPCONFIG_AVG(val) FIELD_PREP(STEPCONFIG_AVG_MASK, (val))
> > #define STEPCONFIG_AVG_16 STEPCONFIG_AVG(4)
> > #define STEPCONFIG_XPP BIT(5)
> > #define STEPCONFIG_XNN BIT(6)
> > @@ -70,43 +71,43 @@
> > #define STEPCONFIG_YNN BIT(8)
> > #define STEPCONFIG_XNP BIT(9)
> > #define STEPCONFIG_YPN BIT(10)
> > -#define STEPCONFIG_RFP(val) ((val) << 12)
> > #define STEPCONFIG_RFP_VREFP GENMASK(13, 12)
> > +#define STEPCONFIG_RFP(val) FIELD_PREP(STEPCONFIG_RFP_VREFP, (val))
> > #define STEPCONFIG_INM_MASK GENMASK(18, 15)
> > -#define STEPCONFIG_INM(val) ((val) << 15)
> > +#define STEPCONFIG_INM(val) FIELD_PREP(STEPCONFIG_INM_MASK, (val))
> > #define STEPCONFIG_INM_ADCREFM STEPCONFIG_INM(8)
> > #define STEPCONFIG_INP_MASK GENMASK(22, 19)
> > -#define STEPCONFIG_INP(val) ((val) << 19)
> > +#define STEPCONFIG_INP(val) FIELD_PREP(STEPCONFIG_INP_MASK, (val))
> > #define STEPCONFIG_INP_AN4 STEPCONFIG_INP(4)
> > #define STEPCONFIG_INP_ADCREFM STEPCONFIG_INP(8)
> > #define STEPCONFIG_FIFO1 BIT(26)
> > -#define STEPCONFIG_RFM(val) ((val) << 23)
> > #define STEPCONFIG_RFM_VREFN GENMASK(24, 23)
> > +#define STEPCONFIG_RFM(val) FIELD_PREP(STEPCONFIG_RFM_VREFN, (val))
> >
> > /* Delay register */
> > #define STEPDELAY_OPEN_MASK GENMASK(17, 0)
> > -#define STEPDELAY_OPEN(val) ((val) << 0)
> > +#define STEPDELAY_OPEN(val) FIELD_PREP(STEPDELAY_OPEN_MASK, (val))
> > #define STEPCONFIG_OPENDLY STEPDELAY_OPEN(0x098)
> > #define STEPDELAY_SAMPLE_MASK GENMASK(31, 24)
> > -#define STEPDELAY_SAMPLE(val) ((val) << 24)
> > +#define STEPDELAY_SAMPLE(val) FIELD_PREP(STEPDELAY_SAMPLE_MASK, (val))
> > #define STEPCONFIG_SAMPLEDLY STEPDELAY_SAMPLE(0)
> >
> > /* Charge Config */
> > #define STEPCHARGE_RFP_MASK GENMASK(14, 12)
> > -#define STEPCHARGE_RFP(val) ((val) << 12)
> > +#define STEPCHARGE_RFP(val) FIELD_PREP(STEPCHARGE_RFP_MASK, (val))
> > #define STEPCHARGE_RFP_XPUL STEPCHARGE_RFP(1)
> > #define STEPCHARGE_INM_MASK GENMASK(18, 15)
> > -#define STEPCHARGE_INM(val) ((val) << 15)
> > +#define STEPCHARGE_INM(val) FIELD_PREP(STEPCHARGE_INM_MASK, (val))
> > #define STEPCHARGE_INM_AN1 STEPCHARGE_INM(1)
> > #define STEPCHARGE_INP_MASK GENMASK(22, 19)
> > -#define STEPCHARGE_INP(val) ((val) << 19)
> > +#define STEPCHARGE_INP(val) FIELD_PREP(STEPCHARGE_INP_MASK, (val))
> > #define STEPCHARGE_RFM_MASK GENMASK(24, 23)
> > -#define STEPCHARGE_RFM(val) ((val) << 23)
> > +#define STEPCHARGE_RFM(val) FIELD_PREP(STEPCHARGE_RFM_MASK, (val))
> > #define STEPCHARGE_RFM_XNUR STEPCHARGE_RFM(1)
> >
> > /* Charge delay */
> > #define CHARGEDLY_OPEN_MASK GENMASK(17, 0)
> > -#define CHARGEDLY_OPEN(val) ((val) << 0)
> > +#define CHARGEDLY_OPEN(val) FIELD_PREP(CHARGEDLY_OPEN_MASK, (val))
> > #define CHARGEDLY_OPENDLY CHARGEDLY_OPEN(0x400)
> >
> > /* Control register */
> > @@ -115,7 +116,7 @@
> > #define CNTRLREG_STEPCONFIGWRT BIT(2)
> > #define CNTRLREG_POWERDOWN BIT(4)
> > #define CNTRLREG_AFE_CTRL_MASK GENMASK(6, 5)
> > -#define CNTRLREG_AFE_CTRL(val) ((val) << 5)
> > +#define CNTRLREG_AFE_CTRL(val) FIELD_PREP(CNTRLREG_AFE_CTRL_MASK, (val))
> > #define CNTRLREG_4WIRE CNTRLREG_AFE_CTRL(1)
> > #define CNTRLREG_5WIRE CNTRLREG_AFE_CTRL(2)
> > #define CNTRLREG_8WIRE CNTRLREG_AFE_CTRL(3)
>
Thanks,
Miquèl
