On Sat 28 Aug 08:18 CDT 2021, Konrad Dybcio wrote:
> Add initial SM6350 SoC and Sony Xperia 10 III (PDX213, Lena platform) device
> trees. There is no sign of another Lena devices on the horizon, so a common
> DTSI is not created for now. 10 III features a Full HD OLED display and 5G
> support, among other nice things like USB3.
>
Thanks for the series, looks quite nice, so please respin with the few
small modifications noted in the reviews.
> The bootloader is VERY unpleasant, to get a bootable setup you have to run:
>
> mkbootimg --kernel arch/arm64/boot/Image.gz --ramdisk [some initrd] \
> --dtb arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dtb \
> --cmdline "[some cmdline]" --base 0 --kernel_offset 0x8000 \
> --ramdisk_offset 0x1000000 --dtb_offset 0x1f00000 --os_version 11 \
> --os_patch_level "2021-08" --tags_offset 0x100 --pagesize 4096 \
> --header_version 2 -o mainline.img
>
> adb reboot bootloader
>
> // You have to either pull vbmeta{"","_system"} from
> // /dev/block/bootdevice/by-name/ or build one as a part of AOSP build process
> fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
> fastboot --disable-verity --disable-verification flash vbmeta_system \
> vbmeta_system.img
>
> fastboot flash boot mainline.img
> fastboot erase dtbo // This will take approx 70s...
I always assumed that erase was broken when it took more than 5 seconds
to clear the dtbo partition(s). So I always just flash a few kB of
/dev/zero.
Regards,
Bjorn
> fastboot reboot
>
> Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> ---
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../qcom/sm6350-sony-xperia-lena-pdx213.dts | 57 +++++++++++++++++++
> 2 files changed, 58 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 5bbeb058e1f2..d1ace2541ce1 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -78,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-akatsuki.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-sony-xperia-tama-apollo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm845-xiaomi-beryllium.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> new file mode 100644
> index 000000000000..a26c23754f5d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6350-sony-xperia-lena-pdx213.dts
> @@ -0,0 +1,57 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
> + */
> +/dts-v1/;
> +
> +#include "sm6350.dtsi"
> +
> +/ {
> + model = "Sony Xperia 10 III";
> + compatible = "sony,pdx213", "qcom,sm6350";
> + qcom,msm-id = <434 0x10000>, <459 0x10000>;
> + qcom,board-id = <0x1000B 0>;
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer: framebuffer@a0000000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0xa0000000 0 0x2300000>;
> + width = <1080>;
> + height = <2520>;
> + stride = <(1080 * 4)>;
> + format = "a8r8g8b8";
> + clocks = <&gcc GCC_DISP_AXI_CLK>;
> + };
> + };
> +};
> +
> +&sdhc_2 {
> + status = "okay";
> +
> + cd-gpios = <&tlmm 94 GPIO_ACTIVE_HIGH>;
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <13 4>, <45 2>, <56 2>;
> +};
> +
> +&usb_1 {
> + status = "okay";
> +};
> +
> +&usb_1_dwc3 {
> + maximum-speed = "super-speed";
> + dr_mode = "peripheral";
> +};
> +
> +&usb_1_hsphy {
> + status = "okay";
> +};
> +
> +&usb_1_qmpphy {
> + status = "okay";
> +};
> --
> 2.33.0
>
