This patch series adds support for the Vertexcom MSE102x Homeplug GreenPHY chips [1]. They can be connected either via RGMII, RMII or SPI to a host CPU. These patches handles only the last one, with an Ethernet over SPI protocol driver. The code has been tested only on Raspberry Pi boards, but should work on other platforms. Any comments about the code are welcome. [1] - http://www.vertexcom.com/p_homeplug_plc_en.html Stefan Wahren (3): dt-bindings: add vendor Vertexcom dt-bindings: net: add Vertexcom MSE102x support net: vertexcom: Add MSE102x SPI support .../bindings/net/vertexcom-mse102x.yaml | 71 ++ .../devicetree/bindings/vendor-prefixes.yaml | 2 + drivers/net/ethernet/Kconfig | 1 + drivers/net/ethernet/Makefile | 1 + drivers/net/ethernet/vertexcom/Kconfig | 25 + drivers/net/ethernet/vertexcom/Makefile | 6 + drivers/net/ethernet/vertexcom/mse102x.c | 803 ++++++++++++++++++ 7 files changed, 909 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/vertexcom-mse102x.yaml create mode 100644 drivers/net/ethernet/vertexcom/Kconfig create mode 100644 drivers/net/ethernet/vertexcom/Makefile create mode 100644 drivers/net/ethernet/vertexcom/mse102x.c -- 2.17.1
