Quoting Rajendra Nayak (2021-09-13 03:58:55)
> Add vcc-supply for the IDP boards that was missed when the
> qfprom device tree properties were added for the sc7280 SoC.
>
> Fixes: c1b2189a19cf ("arm64: dts: qcom: sc7280: Add qfprom node")
> Reported-by: satya priya <skakit@xxxxxxxxxxxxxx>
> Signed-off-by: Rajendra Nayak <rnayak@xxxxxxxxxxxxxx>
> ---
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
> arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> index 371a2a9..99f9ee5 100644
> --- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
> @@ -207,6 +207,10 @@
> };
> };
>
> +&qfprom {
Maybe that node should also be marked status = "disabled" by default so
that it can only be marked OK if the board has setup the regulator
properly?
> + vcc-supply = <&vreg_l1c_1p8>;
> +};
> +
> &qupv3_id_0 {
> status = "okay";
> };
