The sw4 output (V_1V8_S0 voltage) from the PMIC is also used as supply for the eMMC. This voltage can not be changed and is not allowed to switched off. So we do not want to provide this regulator to the SDHC driver to control this voltage. Signed-off-by: Heiko Thiery <heiko.thiery@xxxxxxxxx> --- arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts | 1 - 1 file changed, 1 deletion(-) diff --git a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts index f593e4ff62e1..436d98135ba9 100644 --- a/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts +++ b/arch/arm64/boot/dts/freescale/imx8mq-kontron-pitx-imx8m.dts @@ -348,7 +348,6 @@ pinctrl-0 = <&pinctrl_usdhc1>; pinctrl-1 = <&pinctrl_usdhc1_100mhz>; pinctrl-2 = <&pinctrl_usdhc1_200mhz>; - vqmmc-supply = <&sw4_reg>; bus-width = <8>; non-removable; no-sd; -- 2.20.1
