Am 02.08.2014 15:02, schrieb Tomasz Figa: > On 02.08.2014 02:52, Andreas Färber wrote: >> Use the new style of referencing inherited nodes, use symbolic names, >> tidy indentation and reorder includes. >> >> Goal is the alignment of all exynos5250 based device trees for comparison. >> >> Signed-off-by: Andreas Färber <afaerber@xxxxxxx> >> --- >> v5 -> v6: >> * Updated for mfc node label >> >> v5: New >> Aligns with SMDK. >> >> arch/arm/boot/dts/exynos5250-arndale.dts | 929 ++++++++++++++++--------------- >> 1 file changed, 466 insertions(+), 463 deletions(-) >> > > Diff in resulting dtb: Same here, appears to be over whole series: >> --- exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.102905920 +0200 >> +++ ../dtbs.post/exynos5250-arndale.dtb.dts 2014-08-02 14:54:15.104905920 +0200 >> @@ -1977,7 +1977,7 @@ >> clocks = <0x2 0x158 0x2 0x88 0x2 0x89 0x2 0x9f 0x2 0x400>; >> clock-names = "hdmi", "sclk_hdmi", "sclk_pixel", "sclk_hdmiphy", "mout_hdmi"; >> samsung,syscon-phandle = <0x7>; >> - hpd-gpio = <0xc 0x7 0x2>; >> + hpd-gpio = <0xc 0x7 0x1>; >> vdd_osc-supply = <0x31>; >> vdd_pll-supply = <0x32>; >> vdd-supply = <0x32>; Optional follow-up patch 08/10. >> @@ -2104,15 +2104,9 @@ >> }; >> }; >> >> - usb_hub_bus { >> - compatible = "simple-bus"; >> - #address-cells = <0x1>; >> - #size-cells = <0x0>; >> - >> - usb_hub { >> - compatible = "smsc,usb3503a"; >> - reset-gpios = <0xc 0x5 0x1>; >> - connect-gpios = <0x10 0x7 0x1>; >> - }; >> + usb-hub { >> + compatible = "smsc,usb3503a"; >> + reset-gpios = <0xc 0x5 0x1>; >> + connect-gpios = <0x10 0x7 0x1>; >> }; >> }; Optional follow-up patch 09/10. > Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx> Thanks, Andreas -- SUSE LINUX Products GmbH, Maxfeldstr. 5, 90409 Nürnberg, Germany GF: Jeff Hawn, Jennifer Guild, Felix Imendörffer; HRB 16746 AG Nürnberg -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html