On 02.08.2014 14:21, Tomasz Figa wrote:
> On 02.08.2014 02:52, Andreas Färber wrote:
>> Use the new style of referencing inherited nodes and use symbolic names.
>> Reorder one pinctrl node in GPIO order.
>>
>> Goal is the alignment of all exynos5250 based device trees for comparison.
>>
>> Suggested-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> Reviewed-by: Doug Anderson <dianders@xxxxxxxxxxxx>
>> Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
>> ---
>> v5 -> v6:
>> * Split off label additions (Doug Anderson)
>> * Fixed alphabetical order of sd3_* nodes (Doug Anderson)
>>
>> v4 -> v5:
>> * Introduced labels to consistently use new referencing style (Tomasz Figa)
>> * Use IRQ_TYPE_* constants
>> * Use some more GPIO_ACTIVE_*
>>
>> v3 -> v4: Unchanged
>>
>> v3: New (Doug Anderson)
>>
>> arch/arm/boot/dts/exynos5250-snow.dts | 291 +++++++++++++++++-----------------
>> 1 file changed, 145 insertions(+), 146 deletions(-)
>
> Reviewed-by: Tomasz Figa <t.figa@xxxxxxxxxxx>
Just for convenience of other reviewers, here are actual changes done do
the device tree after compiling into dtb and then back into dts:
> --- exynos5250-snow.dtb.dts 2014-08-02 14:54:15.145905921 +0200
> +++ ../dtbs.post/exynos5250-snow.dtb.dts 2014-08-02 14:54:15.146905921 +0200
> @@ -8,6 +8,7 @@
> model = "Google Snow";
>
> chosen {
> + bootargs = "console=tty1";
> };
>
> aliases {
> @@ -829,15 +830,6 @@
> phandle = <0x44>;
> };
>
> - hdmi-hpd-irq {
> - samsung,pins = "gpx3-7";
> - samsung,pin-function = <0x0>;
> - samsung,pin-pud = <0x1>;
> - samsung,pin-drv = <0x0>;
> - linux,phandle = <0x33>;
> - phandle = <0x33>;
> - };
> -
> max77686-irq {
> samsung,pins = "gpx3-2";
> samsung,pin-function = <0x0>;
> @@ -846,6 +838,15 @@
> linux,phandle = <0xe>;
> phandle = <0xe>;
> };
> +
> + hdmi-hpd-irq {
> + samsung,pins = "gpx3-7";
> + samsung,pin-function = <0x0>;
> + samsung,pin-pud = <0x1>;
> + samsung,pin-drv = <0x0>;
> + linux,phandle = <0x33>;
> + phandle = <0x33>;
> + };
> };
>
> pinctrl@13400000 {
> @@ -1703,12 +1704,12 @@
> samsung,dw-mshc-ciu-div = <0x3>;
> samsung,dw-mshc-sdr-timing = <0x2 0x3>;
> samsung,dw-mshc-ddr-timing = <0x1 0x2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <0x27 0x28 0x29>;
>
> slot@0 {
> reg = <0x0>;
> bus-width = <0x4>;
> - pinctrl-names = "default";
> - pinctrl-0 = <0x27 0x28 0x29>;
> };
> };
>
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
