Re: [PATCH v3 0/6] Migrate PXA27x platforms to clock framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Thu, Jul 31, 2014 at 4:50 AM, Robert Jarzmik <robert.jarzmik@xxxxxxx> wrote:
> This is the third opus of this serie.
> From the previous one :
>  - the boot ordering was fixed
>    For DT, we rely on time_init() in arch/arm
>    For non-DT, we keep the postcore_init() until all 3 PXA variants are
>    converted, and meanwhile I'll discuss with Haojian where to call directly the
>    clocks init function.
>  - the section mismatches were fixed
>    A split is done between CKEN clock descriptor and CKEN clock structure
>
> The result was tested with a Mitac MIO A701 :
>  - with the upstream platform-data based machine code
>  - with the device-tree version
>
> As for the patches, if they are carried fully by Mike, I think there will be a
> minor conflict in arch/arm/mach-pxa/Makefile with the clocksource patches I
> submitted earlier.
>
> As before, the goal remains the same :
>  - keeping legacy platforms working (ie. without device-tree)
>  - enable PXA27x to work with a device-tree kernel, and hence
>    open the way to drivers conversion
>  - be robust enough to support pxa25x and pxa3xx later inclusion
>    with almost no change to clk-pxa-dt.c.
>
> Robert Jarzmik (6):
>   clk: add pxa clocks infrastructure
>   clk: dts: document pxa clock binding
>   arm: pxa: add clock pll selection bits
>   clk: add pxa27x clock drivers
>   dts: add devicetree bindings for pxa27x clocks
>   arm: pxa: Transition pxa27x to clk framework
>
>  .../devicetree/bindings/clock/pxa-clock.txt        |  16 +
>  arch/arm/Kconfig                                   |   1 +
>  arch/arm/boot/dts/pxa27x.dtsi                      |  20 +-
>  arch/arm/mach-pxa/Makefile                         |   8 +-
>  arch/arm/mach-pxa/include/mach/pxa2xx-regs.h       |  10 +
>  arch/arm/mach-pxa/pxa27x.c                         | 186 +----------
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/pxa/Makefile                           |   2 +
>  drivers/clk/pxa/clk-pxa.c                          |  97 ++++++
>  drivers/clk/pxa/clk-pxa.h                          | 107 ++++++
>  drivers/clk/pxa/clk-pxa27x.c                       | 370 +++++++++++++++++++++
>  include/dt-bindings/clock/pxa-clock.h              |  77 +++++
>  12 files changed, 716 insertions(+), 179 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/clock/pxa-clock.txt
>  create mode 100644 drivers/clk/pxa/Makefile
>  create mode 100644 drivers/clk/pxa/clk-pxa.c
>  create mode 100644 drivers/clk/pxa/clk-pxa.h
>  create mode 100644 drivers/clk/pxa/clk-pxa27x.c
>  create mode 100644 include/dt-bindings/clock/pxa-clock.h
>
> --
> 2.0.0.rc2
>

Acked-by: Haojian Zhuang <haojian.zhuang@xxxxxxxxx>

Only with a small comment.

Regards
Haojian
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux