This introduces YAML bindings documentation for the Allwinner A31 MIPI CSI-2 controller. Signed-off-by: Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> Reviewed-by: Maxime Ripard <mripard@xxxxxxxxxx> Reviewed-by: Rob Herring <robh@xxxxxxxxxx> --- .../media/allwinner,sun6i-a31-mipi-csi2.yaml | 142 ++++++++++++++++++ 1 file changed, 142 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml diff --git a/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml new file mode 100644 index 000000000000..09207904b6db --- /dev/null +++ b/Documentation/devicetree/bindings/media/allwinner,sun6i-a31-mipi-csi2.yaml @@ -0,0 +1,142 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/allwinner,sun6i-a31-mipi-csi2.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner A31 MIPI CSI-2 Device Tree Bindings + +maintainers: + - Paul Kocialkowski <paul.kocialkowski@xxxxxxxxxxx> + +properties: + compatible: + oneOf: + - const: allwinner,sun6i-a31-mipi-csi2 + - items: + - const: allwinner,sun8i-v3s-mipi-csi2 + - const: allwinner,sun6i-a31-mipi-csi2 + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + items: + - description: Bus Clock + - description: Module Clock + + clock-names: + items: + - const: bus + - const: mod + + phys: + maxItems: 1 + description: MIPI D-PHY + + phy-names: + items: + - const: dphy + + resets: + maxItems: 1 + + ports: + $ref: /schemas/graph.yaml#/properties/ports + + properties: + port@0: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Input port, connect to a MIPI CSI-2 sensor + + properties: + reg: + const: 0 + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + properties: + data-lanes: + minItems: 1 + maxItems: 4 + + required: + - data-lanes + + additionalProperties: false + + port@1: + $ref: /schemas/graph.yaml#/$defs/port-base + description: Output port, connect to a CSI controller + + properties: + reg: + const: 1 + + endpoint: + $ref: video-interfaces.yaml# + unevaluatedProperties: false + + additionalProperties: false + +required: + - compatible + - reg + - interrupts + - clocks + - clock-names + - phys + - phy-names + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/sun8i-v3s-ccu.h> + #include <dt-bindings/reset/sun8i-v3s-ccu.h> + + mipi_csi2: csi@1cb1000 { + compatible = "allwinner,sun8i-v3s-mipi-csi2", + "allwinner,sun6i-a31-mipi-csi2"; + reg = <0x01cb1000 0x1000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&ccu CLK_BUS_CSI>, + <&ccu CLK_CSI1_SCLK>; + clock-names = "bus", "mod"; + resets = <&ccu RST_BUS_CSI>; + + phys = <&dphy>; + phy-names = "dphy"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + mipi_csi2_in: port@0 { + reg = <0>; + + mipi_csi2_in_ov5648: endpoint { + data-lanes = <1 2 3 4>; + + remote-endpoint = <&ov5648_out_mipi_csi2>; + }; + }; + + mipi_csi2_out: port@1 { + reg = <1>; + + mipi_csi2_out_csi0: endpoint { + remote-endpoint = <&csi0_in_mipi_csi2>; + }; + }; + }; + }; + +... -- 2.32.0
