Re: [PATCH v6 4/4] PCI: qcom: Switch pcie_1_pipe_clk_src after PHY init in SC7280

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Quoting Prasad Malisetty (2021-09-09 10:40:45)
> diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> index 8a7a300..db62b3c 100644
> --- a/drivers/pci/controller/dwc/pcie-qcom.c
> +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> @@ -1167,6 +1169,16 @@ static int qcom_pcie_get_resources_2_7_0(struct qcom_pcie *pcie)
>         if (ret < 0)
>                 return ret;
>
> +       if (of_device_is_compatible(dev->of_node, "qcom,pcie-sc7280")) {

What happened to the approach discussed in v5 of this series where this
is all baked into the device match data?

> +               res->gcc_pcie_1_pipe_clk_src = devm_clk_get(dev, "pipe_mux");
> +               if (IS_ERR(res->gcc_pcie_1_pipe_clk_src))
> +                       return PTR_ERR(res->gcc_pcie_1_pipe_clk_src);
> +
> +               res->phy_pipe_clk = devm_clk_get(dev, "phy_pipe");
> +               if (IS_ERR(res->phy_pipe_clk))
> +                       return PTR_ERR(res->phy_pipe_clk);
> +       }
> +
>         res->pipe_clk = devm_clk_get(dev, "pipe");
>         return PTR_ERR_OR_ZERO(res->pipe_clk);
>  }



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux