On Thu, Sep 09, 2021 at 10:14:18AM +0530, rajpat@xxxxxxxxxxxxxx wrote:
> On 2021-09-03 22:52, Matthias Kaehlcke wrote:
> > On Fri, Sep 03, 2021 at 09:58:59AM +0530, Rajesh Patil wrote:
> > > From: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
> > >
> > > Add QUPv3 wrapper_1 DT nodes for SC7280 SoC.
> > >
> > > Signed-off-by: Roja Rani Yarubandi <rojay@xxxxxxxxxxxxxx>
> > > Signed-off-by: Rajesh Patil <rajpat@xxxxxxxxxxxxxx>
> > > ---
> > > arch/arm64/boot/dts/qcom/sc7280.dtsi | 709
> > > +++++++++++++++++++++++++++++++++++
> > > 1 file changed, 709 insertions(+)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > index 32d1354..8fe54bf 100644
> > > --- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
> >
> > > + qup_spi8_data_clk: qup-spi8-data-clk {
> > > + pins = "gpio32", "gpio33", "gpio34";
> > > + function = "qup10";
> > > + };
> > > +
> > > + qup_spi8_cs: qup-spi8-cs {
> > > + pins = "gpio35";
> > > + function = "qup10";
> > > + };
> >
> > As for wrapper_0, I think we still want the nodes to configure the CS as
> > GPIO.
> >
> > If there are no other reasons to re-spin these could be added with a
> > follow-up
> > patch, so:
> >
> shall we add all removed qup_spiN_cs_gpio nodes?
Yes
