This device has a physical matrix keyboard, connected to a GPIO
expander, for which there's still no support yet.
Though, some of the keys are connected to the MSM8998 GPIOs and not
as a matrix, so these can be added.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
.../boot/dts/qcom/msm8998-fxtec-pro1.dts | 64 +++++++++++++++++++
1 file changed, 64 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
index deabb00758e3..49705fe655ee 100644
--- a/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
+++ b/arch/arm64/boot/dts/qcom/msm8998-fxtec-pro1.dts
@@ -43,6 +43,62 @@ hall-sensor1 {
};
};
+ gpio-kb-extra-keys {
+ compatible = "gpio-keys";
+ input-name = "extra-kb-keys";
+ label = "Keyboard extra keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_kb_pins_extra>;
+
+ home {
+ label = "Home";
+ gpios = <&tlmm 21 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_HOMEPAGE>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+
+ super-l {
+ label = "Super Left";
+ gpios = <&tlmm 32 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_FN>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+
+ super-r {
+ label = "Super Right";
+ gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_FN>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+
+ shift {
+ label = "Shift";
+ gpios = <&tlmm 114 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_RIGHTSHIFT>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+
+ ctrl {
+ label = "Ctrl";
+ gpios = <&tlmm 128 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFTCTRL>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+
+ alt {
+ label = "Alt";
+ gpios = <&tlmm 129 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_LEFTALT>;
+ debounce-interval = <15>;
+ linux,can-disable;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
input-name = "side-buttons";
@@ -205,6 +261,14 @@ mdp_vsync_n: mdp-vsync-n {
drive-strength = <2>;
};
+ gpio_kb_pins_extra: gpio-kb-pins-extra {
+ pins = "gpio21", "gpio32", "gpio33", "gpio114",
+ "gpio128", "gpio129";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+
ts_vio_default: ts-vio-def {
pins = "gpio81";
function = "gpio";
--
2.32.0
