> On Thu, Sep 02, 2021 at 08:37:54AM +0200, Dhananjay Kangude wrote:
> > 1.Converted bindings into yaml format for Cadence UFS host controller
> > 2.Modified reference to cdns,ufshc.txt tp cdns,ufshc.yaml 3.Removed
> > power,domain property from ti,j721e-ufs.yaml as it is not required
>
> Maybe not required, but should be allowed which is still not the case.
I got it. I will add the power,domain property as an optional in ufs and retain ti,j721-ufs.yaml in original form.
> >
> > Signed-off-by: Dhananjay Kangude <dkangude@xxxxxxxxxxx>
> > ---
> > .../devicetree/bindings/ufs/cdns,ufshc.txt | 32 --------
> > .../devicetree/bindings/ufs/cdns,ufshc.yaml | 80
> ++++++++++++++++++++
> > .../devicetree/bindings/ufs/ti,j721e-ufs.yaml | 3 +-
> > 3 files changed, 81 insertions(+), 34 deletions(-) delete mode
> > 100644 Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
> > create mode 100644
> > Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
> > b/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
> > deleted file mode 100644
> > index 02347b0..0000000
> > --- a/Documentation/devicetree/bindings/ufs/cdns,ufshc.txt
> > +++ /dev/null
> > @@ -1,32 +0,0 @@
> > -* Cadence Universal Flash Storage (UFS) Controller
> > -
> > -UFS nodes are defined to describe on-chip UFS host controllers.
> > -Each UFS controller instance should have its own node.
> > -Please see the ufshcd-pltfrm.txt for a list of all available properties.
> > -
> > -Required properties:
> > -- compatible : Compatible list, contains one of the following controllers:
> > - "cdns,ufshc" - Generic CDNS HCI,
> > - "cdns,ufshc-m31-16nm" - CDNS UFS HC + M31 16nm
> PHY
> > - complemented with the JEDEC version:
> > - "jedec,ufs-2.0"
> > -
> > -- reg : Address and length of the UFS register set.
> > -- interrupts : One interrupt mapping.
> > -- freq-table-hz : Clock frequency table.
> > - See the ufshcd-pltfrm.txt for details.
> > -- clocks : List of phandle and clock specifier pairs.
> > -- clock-names : List of clock input name strings sorted in the same
> > - order as the clocks property. "core_clk" is mandatory.
> > - Depending on a type of a PHY,
> > - the "phy_clk" clock can also be added, if needed.
> > -
> > -Example:
> > - ufs@fd030000 {
> > - compatible = "cdns,ufshc", "jedec,ufs-2.0";
> > - reg = <0xfd030000 0x10000>;
> > - interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
> > - freq-table-hz = <0 0>, <0 0>;
> > - clocks = <&ufs_core_clk>, <&ufs_phy_clk>;
> > - clock-names = "core_clk", "phy_clk";
> > - };
> > diff --git a/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
> > b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
> > new file mode 100644
> > index 0000000..4509ae0
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
> > @@ -0,0 +1,80 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) %YAML 1.2
> > +---
> > +$id:
> > +https://urldefense.com/v3/__http://devicetree.org/schemas/ufs/cdns,uf
> >
> +shc.yaml*__;Iw!!EHscmS1ygiU1lA!VP17yEajmecovQs1IfNiRJklavtRgx16eZXg0
> b
> > +G5re3EAQrSfmirkkVpagqs5mE$
> > +$schema:
> > +https://urldefense.com/v3/__http://devicetree.org/meta-schemas/core.y
> >
> +aml*__;Iw!!EHscmS1ygiU1lA!VP17yEajmecovQs1IfNiRJklavtRgx16eZXg0bG5r
> e3
> > +EAQrSfmirkkVpEHrPgh4$
> > +
> > +title: Cadence Universal Flash Storage (UFS) Controller
> > +
> > +maintainers:
> > + - Dhananjay Kangude <dkangude@xxxxxxxxxxx>
> > +
> > +description:
> > + UFS nodes are defined to describe on-chip Cadence UFS host controllers.
> > + Each UFS controller instance should have its own node.
> > +
> > +properties:
> > + compatible:
> > + oneOf:
> > + - items:
> > + - enum:
> > + - cdns,ufshc
> > + - cdns,ufshc-m31-16nm
> > + - const: jedec,ufs-2.0
> > + - items:
> > + - const: jedec,ufs-2.0
> > +
> > + reg:
> > + items:
> > + - description: UFS controller register set
>
> Not a useful description. Just 'maxItems: 1'.
I agree. I will change the property details.
>
> > +
> > + interrupts:
> > + maxItems: 1
> > +
> > + clocks:
> > + minItems: 1
> > + items:
> > + - description: Description of core_clk
> > + - description: Description of phy_clk
> > + - description: Description of ref_clk
>
> 'Description of core_clk'?
OK. I will change it.
> ref_clk was not documented. Okay to add, but mention why in the commit
> msg.
The ref_clk is used by ufs spec to decide ufs device reference clock and it is part of ufs framework.
Usually SoC vendors fix this value by using this property used by core framework.
The details are already mentioned in Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
> > +
> > + clock-names:
> > + minItems: 1
> > + items:
> > + - const: core_clk
> > + - const: phy_clk
> > + - const: ref_clk
> > +
> > + freq-table-hz:
> > + $ref: /schemas/types.yaml#/definitions/uint64-matrix
>
> Not the right type.
I have tried with different ref as single array but it seems not compatible.
The freq-table-hz property need the values in 2D array format.
for example:
freq-table-hz = <250000000 250000000>, <19200000 19200000>, <19200000 19200000>;
Could you suggest what type suits the requirement. Thanks.
>
> > + description:
> > + Clock frequency table.
> > + See the ufshcd-pltfrm.txt for details.
> > +
> > + dma-coherent: true
> > +
> > +required:
> > + - compatible
> > + - reg
> > + - interrupts
> > + - freq-table-hz
> > + - clocks
> > + - clock-names
> > +
> > +additionalProperties: false
> > +unevaluatedProperties: false
>
> Don't need both. Just additionalProperties.
I got it. I will change in next version.
>
> > +
> > +examples:
> > + - |
> > + #include <dt-bindings/interrupt-controller/irq.h>
> > + #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > + ufs: ufs@fd030000 {
> > + compatible = "cdns,ufshc", "jedec,ufs-2.0";
> > + reg = <0xfd030000 0x10000>;
> > + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH>;
> > + freq-table-hz = <0 0>;
> > + clocks = <&ufs_core_clk>;
> > + clock-names = "core_clk";
> > + };
> > +
> > diff --git a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> > b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> > index 4d13e6b..b8f73dd 100644
> > --- a/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> > +++ b/Documentation/devicetree/bindings/ufs/ti,j721e-ufs.yaml
> > @@ -50,7 +50,7 @@ patternProperties:
> > type: object
> > description: |
> > Cadence UFS controller node must be the child node. Refer
> > - Documentation/devicetree/bindings/ufs/cdns,ufshc.txt for binding
> > + Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml for
> > + binding
> > documentation of child node
> >
> > additionalProperties: false
> > @@ -81,7 +81,6 @@ examples:
> > reg = <0x0 0x4000 0x0 0x10000>;
> > interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
> > freq-table-hz = <19200000 19200000>;
> > - power-domains = <&k3_pds 277>;
> > clocks = <&k3_clks 277 1>;
> > assigned-clocks = <&k3_clks 277 1>;
> > assigned-clock-parents = <&k3_clks 277 4>;
> > --
> > 1.7.1
> >
> >
