Re: [PATCH 2/3] dt-bindings: mailbox: Add Apple mailbox bindings

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



> > > +      - description:
> > > +          M3 mailboxes are an older variant with a slightly different MMIO
> > > +          interface still found on the M1.
> > > +        items:
> > > +          - const: apple,t8103-m3-mailbox
> > 
> > Would be nice to document an example of where an M3 mailbox is found.
> 
> Sure, I can add a comment that this is used for the coprocessor controlling Thunderbolt.

That raises another issue ... how do we know the M3 code works at all
without TB support yet? It "looks" correct but some of the IRQ handling
stuff is nontrivial.

> > > +  interrupts:
> > > +    minItems: 4
> > > +    items:
> > > +      - description: send fifo is empty interrupt
> > > +      - description: send fifo is not empty interrupt
> > > +      - description: receive fifo is empty interrupt
> > > +      - description: receive fifo is not empty interrupt
> > > +
> > > +  interrupt-names:
> > > +    minItems: 4
> > > +    items:
> > > +      - const: send-empty
> > > +      - const: send-not-empty
> > > +      - const: recv-empty
> > > +      - const: recv-not-empty
> > 
> > If the names became not-constant the asprintf thing goes away, not sure
> > that's better or worse.
> 
> I'm not sure I understand your comment here. This property just gives a name
> to the interrupts so that they can be referenced by that instead of a magic
> number between 0 and 4 in the driver.

D'oh, right, retracted. (Both this comment and the corresponding comment
on the driver itself). Sorry about that.

> > > +  clocks:
> > > +    description:
> > > +      Reference to the clock gate phandle(s) if required for this mailbox.
> > > +      Optional since not all mailboxes are attached to a clock gate.
> > 
> > Do we do anything with the clocks at this point?
> > 
> 
> The device tree bindings describe the hardware (as best as we can without proper
> documentation) and some of these mailboxes have clock gates which need to be turned
> on before accessing their MMIO. This driver already tries to do that and works fine
> with the downstream clock driver(s) we have.

Good enough for me, thanks for clarifying 👍

Commit r-b, though Rob will surely point out problems and I'll need to
rereview 😉



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux