On Wed, Sep 01, 2021 at 06:07:30PM +0000, Yassine Oudjana wrote: > Add a device tree binding for LG.Philips SW43101. > > Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> > --- > .../display/panel/lgphilips,sw43101.yaml | 52 +++++++++++++++++++ > 1 file changed, 52 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml > > diff --git a/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml b/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml > new file mode 100644 > index 000000000000..da049e9f244e > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/lgphilips,sw43101.yaml > @@ -0,0 +1,52 @@ > +# SPDX-License-Identifier: BSD-3-Clause Not the right license(s). checkpatch.pl will tell you. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/lgphilips,sw43101.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: LG.Philips SW43101 1080x1920 OLED panel > + > +maintainers: > + - Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: lgphilips,sw43101 Looks like this can be added to panel-simple-dsi.yaml instead. Unless it has more than 1 power rail as you didn't document any. > + > + port: true > + reg: true > + reset-gpios: true > + > +required: > + - compatible > + - reg > + - reset-gpios > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + dsi { > + #address-cells = <1>; > + #size-cells = <0>; > + > + panel@0 { > + compatible = "lgphilips,sw43101"; > + reg = <0>; > + > + reset-gpios = <&msmgpio 8 GPIO_ACTIVE_LOW>; > + > + port { > + panel_in: endpoint { > + remote-endpoint = <&dsi_out>; > + }; > + }; > + }; > + }; > + > +... > -- > 2.33.0 > > >
