Re: [PATCH v2 31/46] mfd: ti_am335x_tscadc: Add a boolean to clarify the presence of a touchscreen

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu,  2 Sep 2021 23:51:29 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> Just checking the number of wires will soon not be enough, add a boolean
> to indicated the actual use or not of the touchscreen.
> 
> Certain checks only make sense when there is a touchscreen wired. Make
> this checks explicitly depend on the presence of the touchscreen.
Good.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>

> ---
>  drivers/mfd/ti_am335x_tscadc.c | 7 +++++--
>  1 file changed, 5 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index f30bcdf600fb..cfdef833dffb 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -120,6 +120,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  	struct mfd_cell *cell;
>  	struct property *prop;
>  	const __be32 *cur;
> +	bool use_tsc = false;
>  	u32 val;
>  	int err;
>  	int tscmag_wires = 0, adc_channels = 0, cell_idx = 0, total_channels;
> @@ -143,6 +144,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  	of_property_read_u32(node, "ti,wires", &tscmag_wires);
>  	of_property_read_u32(node, "ti,coordiante-readouts", &readouts);
>  	of_node_put(node);
> +	if (tscmag_wires)
> +		use_tsc = true;
>  
>  	node = of_get_child_by_name(pdev->dev.of_node, "adc");
>  	of_property_for_each_u32(node, "ti,adc-channels", prop, cur, val) {
> @@ -168,7 +171,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  		return -EINVAL;
>  	}
>  
> -	if (readouts * 2 + 2 + adc_channels > 16) {
> +	if (use_tsc && (readouts * 2 + 2 + adc_channels > 16)) {
>  		dev_err(&pdev->dev, "Too many step configurations requested\n");
>  		return -EINVAL;
>  	}
> @@ -221,7 +224,7 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  
>  	/* Set the control register bits */
>  	tscadc->ctrl = CNTRLREG_TSC_STEPCONFIGWRT | CNTRLREG_STEPID;
> -	if (tscmag_wires > 0) {
> +	if (use_tsc) {
>  		tscadc->ctrl |= CNTRLREG_TSC_ENB;
>  		if (tscmag_wires == 5)
>  			tscadc->ctrl |= CNTRLREG_TSC_5WIRE;




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux