[PATCH v3 0/4] Add remoteproc driver for DSP on i.MX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Provide a basic driver to control DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP.

Currently it is able to resolve addresses between DSP and main CPU,
start and stop the processor, suspend and resume.

The communication between DSP and main CPU is based on mailbox, there
are three mailbox channels (tx, rx, rxdb).

This driver was tested on NXP i.MX8QM, i.MX8QXP, i.MX8MP and i.MX8ULP.

changes in v3:
- Add this cover letter
- refine clock-names according to Rob's comments
- move common struct from imx_rproc.c to header file
- add IMX_RPROC_SCU_API enum item
- refine driver according to Mathieu's comments

changes in v2:
- change syscon to fsl,dsp-ctrl
- add items for clock-names

Shengjiu Wang (4):
  remoteproc: imx_rproc: Move common structure to header file
  remoteproc: imx_rproc: Add IMX_RPROC_SCU_API method
  dt-bindings: remoteproc: Add fsl,imx-dsp-rproc binding document
  remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX

 .../remoteproc/fsl,imx-dsp-rproc.yaml         |  131 ++
 drivers/remoteproc/Kconfig                    |   11 +
 drivers/remoteproc/Makefile                   |    1 +
 drivers/remoteproc/imx_dsp_rproc.c            | 1178 +++++++++++++++++
 drivers/remoteproc/imx_rproc.c                |   28 +-
 drivers/remoteproc/imx_rproc.h                |   39 +
 6 files changed, 1361 insertions(+), 27 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/remoteproc/fsl,imx-dsp-rproc.yaml
 create mode 100644 drivers/remoteproc/imx_dsp_rproc.c
 create mode 100644 drivers/remoteproc/imx_rproc.h

-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux