Hello,
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote on Thu, 2 Sep 2021
23:51:43 +0200:
> This hardware module is close to the am33xx ADC module but instead of
> featuring a touchscreen it has a magnetic reader capability.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
> ---
> arch/arm/boot/dts/am437x-l4.dtsi | 31 ++++++++++++++++++++++++++--
> arch/arm/boot/dts/am43xx-clocks.dtsi | 7 +++++++
> 2 files changed, 36 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/am437x-l4.dtsi b/arch/arm/boot/dts/am437x-l4.dtsi
> index 370c4e64676f..7a3dcfc7bfc9 100644
> --- a/arch/arm/boot/dts/am437x-l4.dtsi
> +++ b/arch/arm/boot/dts/am437x-l4.dtsi
> @@ -2350,11 +2350,38 @@ hdq: hdq@0 {
> };
>
> target-module@4c000 { /* 0x4834c000, ap 114 72.0 */
> - compatible = "ti,sysc";
> - status = "disabled";
> + compatible = "ti,sysc-omap4", "ti,sysc";
> + reg = <0x4c000 0x4>,
> + <0x4c010 0x4>;
> + reg-names = "rev", "sysc";
> + ti,sysc-sidle = <SYSC_IDLE_FORCE>,
> + <SYSC_IDLE_NO>,
> + <SYSC_IDLE_SMART>;
> + clocks = <&l3s_clkctrl AM4_L3S_ADC1_CLKCTRL 0>;
> + clock-names = "fck";
> #address-cells = <1>;
> #size-cells = <1>;
> ranges = <0x0 0x4c000 0x2000>;
> +
> + magadc: magadc@0 {
> + compatible = "ti,am4372-magadc";
> + reg = <0x0 0x2000>;
> + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&adc_mag_fck>;
> + clock-names = "fck";
> + dmas = <&edma 54 0>, <&edma 55 0>;;
Small typo here, should have a single ';'.
As the series is fairly long, we will see if there is a need to resend
it or not.
> + dma-names = "fifo0", "fifo1";
> + status = "disabled";
> +
> + mag {
> + compatible = "ti,am4372-mag";
> + };
> +
> + adc {
> + #io-channel-cells = <1>;
> + compatible ="ti,am4372-adc";
> + };
> + };
> };
>
> target-module@80000 { /* 0x48380000, ap 123 42.0 */
> diff --git a/arch/arm/boot/dts/am43xx-clocks.dtsi b/arch/arm/boot/dts/am43xx-clocks.dtsi
> index c726cd8dbdf1..59b1f592a743 100644
> --- a/arch/arm/boot/dts/am43xx-clocks.dtsi
> +++ b/arch/arm/boot/dts/am43xx-clocks.dtsi
> @@ -444,6 +444,13 @@ wdt1_fck: wdt1_fck@422c {
> reg = <0x422c>;
> };
>
> + adc_mag_fck: adc_mag_fck@424c {
> + #clock-cells = <0>;
> + compatible = "ti,mux-clock";
> + clocks = <&sys_clkin_ck>, <&dpll_per_m2_ck>;
> + reg = <0x424c>;
> + };
> +
> l3_gclk: l3_gclk {
> #clock-cells = <0>;
> compatible = "fixed-factor-clock";
Thanks,
Miquèl
