The datasheet states that most of the configuration should be set in the control register in the first place, before actually enabling the hardware. So far only half of the configuration was made in the first step, which does not make really sense and would complicating the code when introducing support for the am437x hardware. Let's move that register write a bit below to enclose more configuration. Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx> --- drivers/mfd/ti_am335x_tscadc.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c index 29ada9da8826..a0db3e4ff265 100644 --- a/drivers/mfd/ti_am335x_tscadc.c +++ b/drivers/mfd/ti_am335x_tscadc.c @@ -239,6 +239,8 @@ static int ti_tscadc_probe(struct platform_device *pdev) } regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl); + regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl); + tscadc_idle_config(tscadc); /* Enable the TSC module enable bit */ -- 2.27.0
