On Wed, Sep 01, 2021 at 05:55:58PM +0200, AngeloGioacchino Del Regno wrote: > Rewrite the qcom-opp as qcom-level-opp in dt schema format. > > Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> > --- > .../bindings/opp/qcom-level-opp.yaml | 68 +++++++++++++++++++ > .../devicetree/bindings/opp/qcom-opp.txt | 19 ------ > 2 files changed, 68 insertions(+), 19 deletions(-) > create mode 100644 Documentation/devicetree/bindings/opp/qcom-level-opp.yaml > delete mode 100644 Documentation/devicetree/bindings/opp/qcom-opp.txt > > diff --git a/Documentation/devicetree/bindings/opp/qcom-level-opp.yaml b/Documentation/devicetree/bindings/opp/qcom-level-opp.yaml > new file mode 100644 > index 000000000000..65dd2d5d9566 > --- /dev/null > +++ b/Documentation/devicetree/bindings/opp/qcom-level-opp.yaml > @@ -0,0 +1,68 @@ > +# SPDX-License-Identifier: GPL-2.0 This one of course came from default GPL2 source, but I'm sure the authors are QCom/Linaro and they would be happy to dual license. > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/opp/qcom-level-opp.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Qualcomm OPP bindings for fuse and voltage level OPPs > + > +maintainers: > + - AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx> > + - Niklas Cassel <niklas.cassel@xxxxxxxxxx> > + > +allOf: > + - $ref: opp-v2-base.yaml# > + > +properties: > + compatible: > + const: operating-points-v2-qcom-level > + > + opp-shared: true > + > +required: > + - compatible > + > +patternProperties: > + '^opp-?[0-9]+$': > + type: object > + > + properties: > + opp-level: true > + qcom,opp-fuse-level: > + description: > + At least one positive value representing the fuse corner or level > + associated with this OPP node. In case this is used for CPR >=v3, > + multiple array entries are referring to different CPR threads. > + Sometimes several corners/levels shares a certain fuse > + corner/level. A fuse corner/level contains e.g. ref uV, min uV, > + and max uV. > + $ref: /schemas/types.yaml#/definitions/uint32-array > + > + required: > + - opp-level > + - qcom,opp-fuse-level > + > + unevaluatedProperties: false > + > +additionalProperties: false > + > +examples: > + - | > + cpr_opp_table: opp-table-cpr { > + compatible = "operating-points-v2-qcom-level"; > + > + cpr_opp1: opp1 { > + opp-level = <1>; > + qcom,opp-fuse-level = <1>; > + }; > + cpr_opp2: opp2 { > + opp-level = <2>; > + qcom,opp-fuse-level = <2>; > + }; > + cpr_opp3: opp3 { > + opp-level = <3>; > + qcom,opp-fuse-level = <3>; > + }; > + }; > + > +... > diff --git a/Documentation/devicetree/bindings/opp/qcom-opp.txt b/Documentation/devicetree/bindings/opp/qcom-opp.txt > deleted file mode 100644 > index 41d3e4ff2dc3..000000000000 > --- a/Documentation/devicetree/bindings/opp/qcom-opp.txt > +++ /dev/null > @@ -1,19 +0,0 @@ > -Qualcomm OPP bindings to describe OPP nodes > - > -The bindings are based on top of the operating-points-v2 bindings > -described in Documentation/devicetree/bindings/opp/opp-v2-base.yaml > -Additional properties are described below. > - > -* OPP Table Node > - > -Required properties: > -- compatible: Allow OPPs to express their compatibility. It should be: > - "operating-points-v2-qcom-level" > - > -* OPP Node > - > -Required properties: > -- qcom,opp-fuse-level: A positive value representing the fuse corner/level > - associated with this OPP node. Sometimes several corners/levels shares > - a certain fuse corner/level. A fuse corner/level contains e.g. ref uV, > - min uV, and max uV. > -- > 2.32.0 > >
