Convert gpmc-onenand.txt to ti,gpmc-onenand.yaml.
Signed-off-by: Roger Quadros <rogerq@xxxxxxxxxx>
---
.../devicetree/bindings/mtd/gpmc-onenand.txt | 48 -------------
.../bindings/mtd/ti,gpmc-onenand.yaml | 71 +++++++++++++++++++
2 files changed, 71 insertions(+), 48 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
create mode 100644 Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
diff --git a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt b/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
deleted file mode 100644
index 0da78cc4ccca..000000000000
--- a/Documentation/devicetree/bindings/mtd/gpmc-onenand.txt
+++ /dev/null
@@ -1,48 +0,0 @@
-Device tree bindings for GPMC connected OneNANDs
-
-GPMC connected OneNAND (found on OMAP boards) are represented as child nodes of
-the GPMC controller with a name of "onenand".
-
-All timing relevant properties as well as generic gpmc child properties are
-explained in a separate documents - please refer to
-Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
-
-Required properties:
-
- - compatible: "ti,omap2-onenand"
- - reg: The CS line the peripheral is connected to
- - gpmc,device-width: Width of the ONENAND device connected to the GPMC
- in bytes. Must be 1 or 2.
-
-Optional properties:
-
- - int-gpios: GPIO specifier for the INT pin.
-
-For inline partition table parsing (optional):
-
- - #address-cells: should be set to 1
- - #size-cells: should be set to 1
-
-Example for an OMAP3430 board:
-
- gpmc: gpmc@6e000000 {
- compatible = "ti,omap3430-gpmc";
- ti,hwmods = "gpmc";
- reg = <0x6e000000 0x1000000>;
- interrupts = <20>;
- gpmc,num-cs = <8>;
- gpmc,num-waitpins = <4>;
- #address-cells = <2>;
- #size-cells = <1>;
-
- onenand@0 {
- compatible = "ti,omap2-onenand";
- reg = <0 0 0>; /* CS0, offset 0 */
- gpmc,device-width = <2>;
-
- #address-cells = <1>;
- #size-cells = <1>;
-
- /* partitions go here */
- };
- };
diff --git a/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
new file mode 100644
index 000000000000..5b0d2b549919
--- /dev/null
+++ b/Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mtd/ti,gpmc-onenand.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OneNAND over Texas Instruments GPMC bus.
+
+maintainers:
+ - Tony Lindgren <tony@xxxxxxxxxxx>
+ - Roger Quadros <rogerq@xxxxxxxxxx>
+
+description:
+
+ GPMC connected OneNAND (found on OMAP boards) are represented
+ as child nodes of the GPMC controller.
+
+ All timing relevant properties as well as generic gpmc child properties are
+ explained in
+ Documentation/devicetree/bindings/memory-controllers/ti,gpmc.yaml
+
+properties:
+ compatible:
+ const: ti,omap2-onenand
+
+ reg:
+ items:
+ - description: |
+ Chip Select number, register offset and size of
+ OneNAND register window.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ int-gpios:
+ description: GPIO specifier for the INT pin.
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: true
+
+examples:
+ - |
+ gpmc: memory-controller@6e000000 {
+ compatible = "ti,omap3430-gpmc";
+ reg = <0x6e000000 0x02d0>;
+ interrupts = <20>;
+ gpmc,num-cs = <8>;
+ gpmc,num-waitpins = <4>;
+ clocks = <&l3s_clkctrl>;
+ clock-names = "fck";
+ #address-cells = <2>;
+ #size-cells = <1>;
+
+ ranges = <0 0 0x01000000 0x01000000>, /* 16 MB for OneNAND */
+ <1 0 0x02000000 0x01000000>; /* 16 MB for smc91c96 */
+
+ onenand@0,0 {
+ compatible = "ti,omap2-onenand";
+ reg = <0 0 0x20000>; /* CS0, offset 0, IO size 128K */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
--
2.17.1
