Re: [PATCH v2 2/2] mmc: mediatek: Add HS400 online tuning support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, 2021-09-02 at 09:52 +0800, Wenbin Mei wrote:
> Due to the influence of the corner IC and vcore voltage, for the
> stability
> of HS400 mode, we Add HS400 mode online tuning support for mediatek
> mmc
> host.
> 
> Signed-off-by: Wenbin Mei <wenbin.mei@xxxxxxxxxxxx>
  Reviewed-by: Chaotian Jing <chaotian.jing@xxxxxxxxxxxx>
> ---
>  drivers/mmc/core/mmc.c    |   8 ++++
>  drivers/mmc/host/mtk-sd.c | 118
> +++++++++++++++++++++++++++++++++++++++++++++-
>  include/linux/mmc/host.h  |   3 ++
>  3 files changed, 127 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c
> index 838726b..0aa72ac 100644
> --- a/drivers/mmc/core/mmc.c
> +++ b/drivers/mmc/core/mmc.c
> @@ -1222,6 +1222,14 @@ static int mmc_select_hs400(struct mmc_card
> *card)
>  	mmc_set_timing(host, MMC_TIMING_MMC_HS400);
>  	mmc_set_bus_speed(card);
>  
> +	if (host->ops->execute_hs400_tuning) {
> +		mmc_retune_disable(host);
> +		err = host->ops->execute_hs400_tuning(host, card);
> +		mmc_retune_enable(host);
> +		if (err)
> +			goto out_err;
> +	}
> +
>  	if (host->ops->hs400_complete)
>  		host->ops->hs400_complete(host);
>  
> diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c
> index 4dfc246..484f5c3 100644
> --- a/drivers/mmc/host/mtk-sd.c
> +++ b/drivers/mmc/host/mtk-sd.c
> @@ -258,6 +258,7 @@
>  #define MSDC_PAD_TUNE_RD_SEL	  (0x1 << 13)   /* RW */
>  #define MSDC_PAD_TUNE_CMD_SEL	  (0x1 << 21)   /* RW */
>  
> +#define PAD_DS_TUNE_DLY_SEL       (0x1 << 0)	/* RW */
>  #define PAD_DS_TUNE_DLY1	  (0x1f << 2)   /* RW */
>  #define PAD_DS_TUNE_DLY2	  (0x1f << 7)   /* RW */
>  #define PAD_DS_TUNE_DLY3	  (0x1f << 12)  /* RW */
> @@ -301,6 +302,11 @@
>  #define PAD_CMD_RD_RXDLY_SEL    (0x1 << 11)     /* RW */
>  #define PAD_CMD_TX_DLY          (0x1f << 12)    /* RW */
>  
> +/* EMMC50_PAD_DS_TUNE mask */
> +#define PAD_DS_DLY_SEL		(0x1 << 16)	/* RW */
> +#define PAD_DS_DLY1		(0x1f << 10)	/* RW */
> +#define PAD_DS_DLY3		(0x1f << 0)	/* RW */
> +
>  #define REQ_CMD_EIO  (0x1 << 0)
>  #define REQ_CMD_TMO  (0x1 << 1)
>  #define REQ_DAT_ERR  (0x1 << 2)
> @@ -448,11 +454,13 @@ struct msdc_host {
>  	bool vqmmc_enabled;
>  	u32 latch_ck;
>  	u32 hs400_ds_delay;
> +	u32 hs400_ds_dly3;
>  	u32 hs200_cmd_int_delay; /* cmd internal delay for HS200/SDR104
> */
>  	u32 hs400_cmd_int_delay; /* cmd internal delay for HS400 */
>  	bool hs400_cmd_resp_sel_rising;
>  				 /* cmd response sample selection for
> HS400 */
>  	bool hs400_mode;	/* current eMMC will run at hs400 mode */
> +	bool hs400_tuning;	/* hs400 mode online tuning */
>  	bool internal_cd;	/* Use internal card-detect logic */
>  	bool cqhci;		/* support eMMC hw cmdq */
>  	struct msdc_save_para save_para; /* used when gate HCLK */
> @@ -1190,7 +1198,8 @@ static bool msdc_cmd_done(struct msdc_host
> *host, int events,
>  	if (!sbc_error && !(events & MSDC_INT_CMDRDY)) {
>  		if (events & MSDC_INT_CMDTMO ||
>  		    (cmd->opcode != MMC_SEND_TUNING_BLOCK &&
> -		     cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200))
> +		     cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200 &&
> +		     !host->hs400_tuning))
>  			/*
>  			 * should not clear fifo/interrupt as the tune
> data
>  			 * may have alreay come when cmd19/cmd21 gets
> response
> @@ -1287,7 +1296,8 @@ static void msdc_cmd_next(struct msdc_host
> *host,
>  	if ((cmd->error &&
>  	    !(cmd->error == -EILSEQ &&
>  	      (cmd->opcode == MMC_SEND_TUNING_BLOCK ||
> -	       cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200))) ||
> +	       cmd->opcode == MMC_SEND_TUNING_BLOCK_HS200 ||
> +	       host->hs400_tuning))) ||
>  	    (mrq->sbc && mrq->sbc->error))
>  		msdc_request_done(host, mrq);
>  	else if (cmd == mrq->sbc)
> @@ -2251,6 +2261,106 @@ static int msdc_prepare_hs400_tuning(struct
> mmc_host *mmc, struct mmc_ios *ios)
>  	return 0;
>  }
>  
> +static int msdc_send_cxd_data(struct mmc_card *card, struct mmc_host
> *host)
> +{
> +	struct mmc_request mrq = {};
> +	struct mmc_command cmd = {};
> +	struct mmc_data data = {};
> +	unsigned int len = 512;
> +	struct scatterlist sg;
> +	u8 *ext_csd;
> +
> +	ext_csd = kzalloc(len, GFP_KERNEL);
> +	if (!ext_csd)
> +		return -ENOMEM;
> +
> +	mrq.cmd = &cmd;
> +	mrq.data = &data;
> +
> +	cmd.opcode = MMC_SEND_EXT_CSD;
> +	cmd.arg = 0;
> +	cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_ADTC;
> +
> +	data.blksz = len;
> +	data.blocks = 1;
> +	data.flags = MMC_DATA_READ;
> +	data.sg = &sg;
> +	data.sg_len = 1;
> +
> +	sg_init_one(&sg, ext_csd, len);
> +	mmc_set_data_timeout(&data, card);
> +	mmc_wait_for_req(host, &mrq);
> +
> +	kfree(ext_csd);
> +
> +	if (cmd.error)
> +		return cmd.error;
> +	if (data.error)
> +		return data.error;
> +
> +	return 0;
> +}
> +
> +static int msdc_execute_hs400_tuning(struct mmc_host *mmc, struct
> mmc_card *card)
> +{
> +	struct msdc_host *host = mmc_priv(mmc);
> +	struct msdc_delay_phase dly1_delay;
> +	u32 val, result_dly1 = 0;
> +	int i, ret;
> +
> +	if (host->top_base) {
> +		sdr_set_bits(host->top_base + EMMC50_PAD_DS_TUNE,
> +			     PAD_DS_DLY_SEL);
> +		if (host->hs400_ds_dly3)
> +			sdr_set_field(host->top_base +
> EMMC50_PAD_DS_TUNE,
> +				      PAD_DS_DLY3, host-
> >hs400_ds_dly3);
> +	} else {
> +		sdr_set_bits(host->base + PAD_DS_TUNE,
> PAD_DS_TUNE_DLY_SEL);
> +		if (host->hs400_ds_dly3)
> +			sdr_set_field(host->base + PAD_DS_TUNE,
> +				      PAD_DS_TUNE_DLY3, host-
> >hs400_ds_dly3);
> +	}
> +
> +	host->hs400_tuning = true;
> +	for (i = 0; i < PAD_DELAY_MAX; i++) {
> +		if (host->top_base)
> +			sdr_set_field(host->top_base +
> EMMC50_PAD_DS_TUNE,
> +				      PAD_DS_DLY1, i);
> +		else
> +			sdr_set_field(host->base + PAD_DS_TUNE,
> +				      PAD_DS_TUNE_DLY1, i);
> +		ret = msdc_send_cxd_data(card, mmc);
> +		if (!ret)
> +			result_dly1 |= (1 << i);
> +	}
> +	host->hs400_tuning = false;
> +
> +	dly1_delay = get_best_delay(host, result_dly1);
> +	if (dly1_delay.maxlen == 0) {
> +		dev_err(host->dev, "Failed to get DLY1 delay!\n");
> +		goto fail;
> +	}
> +	if (host->top_base)
> +		sdr_set_field(host->top_base + EMMC50_PAD_DS_TUNE,
> +			      PAD_DS_DLY1, dly1_delay.final_phase);
> +	else
> +		sdr_set_field(host->base + PAD_DS_TUNE,
> +			      PAD_DS_TUNE_DLY1,
> dly1_delay.final_phase);
> +
> +	if (host->top_base)
> +		val = readl(host->top_base + EMMC50_PAD_DS_TUNE);
> +	else
> +		val = readl(host->base + PAD_DS_TUNE);
> +
> +	dev_info(host->dev, "Fianl PAD_DS_TUNE: 0x%x\n", val);
> +
> +	return 0;
> +
> +fail:
> +	dev_err(host->dev, "Failed to tuning DS pin delay!\n");
> +	return -EIO;
> +}
> +
>  static void msdc_hw_reset(struct mmc_host *mmc)
>  {
>  	struct msdc_host *host = mmc_priv(mmc);
> @@ -2377,6 +2487,7 @@ static void msdc_cqe_post_disable(struct
> mmc_host *mmc)
>  	.card_busy = msdc_card_busy,
>  	.execute_tuning = msdc_execute_tuning,
>  	.prepare_hs400_tuning = msdc_prepare_hs400_tuning,
> +	.execute_hs400_tuning = msdc_execute_hs400_tuning,
>  	.hw_reset = msdc_hw_reset,
>  };
>  
> @@ -2396,6 +2507,9 @@ static void msdc_of_property_parse(struct
> platform_device *pdev,
>  	of_property_read_u32(pdev->dev.of_node, "hs400-ds-delay",
>  			     &host->hs400_ds_delay);
>  
> +	of_property_read_u32(pdev->dev.of_node, "mediatek,hs400-ds-
> dly3",
> +			     &host->hs400_ds_dly3);
> +
>  	of_property_read_u32(pdev->dev.of_node, "mediatek,hs200-cmd-
> int-delay",
>  			     &host->hs200_cmd_int_delay);
>  
> diff --git a/include/linux/mmc/host.h b/include/linux/mmc/host.h
> index ff1a251..7552d5e 100644
> --- a/include/linux/mmc/host.h
> +++ b/include/linux/mmc/host.h
> @@ -162,6 +162,9 @@ struct mmc_host_ops {
>  	/* Prepare HS400 target operating frequency depending host
> driver */
>  	int	(*prepare_hs400_tuning)(struct mmc_host *host, struct
> mmc_ios *ios);
>  
> +	/* Execute HS400 tuning depending host driver */
> +	int	(*execute_hs400_tuning)(struct mmc_host *host, struct
> mmc_card *card);
> +
>  	/* Prepare switch to DDR during the HS400 init sequence */
>  	int	(*hs400_prepare_ddr)(struct mmc_host *host);
>  




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux