Move blsp1_uart2_default and blsp1_uart2_sleep to the SoC device tree to
avoid duplicating them in other device trees.
Signed-off-by: Yassine Oudjana <y.oudjana@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi | 29 --------------------
arch/arm64/boot/dts/qcom/msm8996.dtsi | 17 ++++++++++++
2 files changed, 17 insertions(+), 29 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
index 51e17094d7b1..eca428ab2517 100644
--- a/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
+++ b/arch/arm64/boot/dts/qcom/apq8096-db820c.dtsi
@@ -148,9 +148,6 @@ &blsp1_spi1 {
&blsp1_uart2 {
label = "BT-UART";
status = "okay";
- pinctrl-names = "default", "sleep";
- pinctrl-0 = <&blsp1_uart2_default>;
- pinctrl-1 = <&blsp1_uart2_sleep>;
bluetooth {
compatible = "qcom,qca6174-bt";
@@ -437,32 +434,6 @@ config {
};
};
- blsp1_uart2_default: blsp1_uart2_default {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "blsp_uart2";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <16>;
- bias-disable;
- };
- };
-
- blsp1_uart2_sleep: blsp1_uart2_sleep {
- mux {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- function = "gpio";
- };
-
- config {
- pins = "gpio41", "gpio42", "gpio43", "gpio44";
- drive-strength = <2>;
- bias-disable;
- };
- };
-
hdmi_hpd_active: hdmi_hpd_active {
mux {
pins = "gpio34";
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index 52df22ab3f6a..23c3435ab888 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1211,6 +1211,20 @@ wake {
};
};
+ blsp1_uart2_default: blsp1-uart2-default {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "blsp_uart2";
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ blsp1_uart2_sleep: blsp1-uart2-sleep {
+ pins = "gpio41", "gpio42", "gpio43", "gpio44";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
blsp1_i2c3_default: blsp1-i2c2-default {
pins = "gpio47", "gpio48";
function = "blsp_i2c3";
@@ -2704,6 +2718,9 @@ blsp1_uart2: serial@7570000 {
clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
<&gcc GCC_BLSP1_AHB_CLK>;
clock-names = "core", "iface";
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&blsp1_uart2_default>;
+ pinctrl-1 = <&blsp1_uart2_sleep>;
dmas = <&blsp1_dma 2>, <&blsp1_dma 3>;
dma-names = "tx", "rx";
status = "disabled";
--
2.33.0
