The QFPROM iospace was (erroneously, I believe) set to the uncalibrated
fuse start address, but every driver only needs - and will always only
need - only calibrated values.
Move the iospace forward to the calibrated values start to avoid
offsetting every fuse definition.
Obviously, the only defined fuse (qusb2_hstx_trim) was also fixed to
remove the offset, in order to comply with this change.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/msm8998.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 625d0fd7e33d..221dc61ca5e3 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -867,14 +867,14 @@ rpm_msg_ram: memory@778000 {
reg = <0x00778000 0x7000>;
};
- qfprom: qfprom@780000 {
+ qfprom: qfprom@784000 {
compatible = "qcom,qfprom";
- reg = <0x00780000 0x621c>;
+ reg = <0x00784000 0x621c>;
#address-cells = <1>;
#size-cells = <1>;
- qusb2_hstx_trim: hstx-trim@423a {
- reg = <0x423a 0x1>;
+ qusb2_hstx_trim: hstx-trim@23a {
+ reg = <0x23a 0x1>;
bits = <0 4>;
};
};
--
2.32.0
