On Sat, Aug 28, 2021 at 12:26:39PM +0100, Paul Cercueil wrote: > Add binding for the AUO A030JTN01 panel, which is a 320x480 3.0" 4:3 > 24-bit TFT LCD panel with non-square pixels and a delta-RGB 8-bit > interface. > > Signed-off-by: Paul Cercueil <paul@xxxxxxxxxxxxxxx> > --- > .../bindings/display/panel/auo,a030jtn01.yaml | 57 +++++++++++++++++++ > 1 file changed, 57 insertions(+) > create mode 100644 Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml This appears to be panel-simple.yaml plus 'reg' (and potentially other SPI properties). Perhaps rename to panel-simple-spi.yaml? Maybe there's others already? > > diff --git a/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml > new file mode 100644 > index 000000000000..21c9d62e3625 > --- /dev/null > +++ b/Documentation/devicetree/bindings/display/panel/auo,a030jtn01.yaml > @@ -0,0 +1,57 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/display/panel/auo,a030jtn01.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: AUO A030JTN01 3.0" (320x480 pixels) 24-bit TFT LCD > + > +description: | > + The panel must obey the rules for a SPI slave device as specified in > + spi/spi-controller.yaml > + > +maintainers: > + - Paul Cercueil <paul@xxxxxxxxxxxxxxx> > + > +allOf: > + - $ref: panel-common.yaml# > + > +properties: > + compatible: > + const: auo,a030jtn01 > + > + backlight: true > + port: true > + power-supply: true > + reg: true > + reset-gpios: true > + > +required: > + - compatible > + - reg > + - power-supply > + - reset-gpios > + > +unevaluatedProperties: false > + > +examples: > + - | > + #include <dt-bindings/gpio/gpio.h> > + > + panel@0 { > + compatible = "auo,a030jtn01"; > + reg = <0>; > + > + spi-max-frequency = <10000000>; > + > + reset-gpios = <&gpe 4 GPIO_ACTIVE_LOW>; > + power-supply = <&lcd_power>; > + > + backlight = <&backlight>; > + > + port { > + panel_input: endpoint { > + remote-endpoint = <&panel_output>; > + }; > + }; > + }; > -- > 2.33.0 > >
