[PATCH 1/7] arm64: dts: ls1028a: move pixel clock pll into /soc

[Michael Walle <michael@xxxxxxxx>]

Move it inside the /soc subnode because it is part of the CCSR space.

Signed-off-by: Michael Walle <michael@xxxxxxxx>
---
 arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi | 14 +++++++-------
 1 file changed, 7 insertions(+), 7 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 343ecf0e8973..9a65a7118faa 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -80,13 +80,6 @@ osc_27m: clock-osc-27m {
 		clock-output-names = "phy_27m";
 	};
 
-	dpclk: clock-controller@f1f0000 {
-		compatible = "fsl,ls1028a-plldig";
-		reg = <0x0 0xf1f0000 0x0 0xffff>;
-		#clock-cells = <0>;
-		clocks = <&osc_27m>;
-	};
-
 	firmware {
 		optee: optee  {
 			compatible = "linaro,optee-tz";
@@ -926,6 +919,13 @@ QORIQ_CLK_PLL_DIV(2)>,
 			status = "disabled";
 		};
 
+		dpclk: clock-controller@f1f0000 {
+			compatible = "fsl,ls1028a-plldig";
+			reg = <0x0 0xf1f0000 0x0 0x10000>;
+			#clock-cells = <0>;
+			clocks = <&osc_27m>;
+		};
+
 		tmu: tmu@1f80000 {
 			compatible = "fsl,qoriq-tmu";
 			reg = <0x0 0x1f80000 0x0 0x10000>;
-- 
2.30.2