On 28-08-21, 23:01, Hector Yuan wrote:
> diff --git a/drivers/cpufreq/mediatek-cpufreq-hw.c b/drivers/cpufreq/mediatek-cpufreq-hw.c
> new file mode 100644
> index 0000000..79862a5
> --- /dev/null
> +++ b/drivers/cpufreq/mediatek-cpufreq-hw.c
> @@ -0,0 +1,319 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2020 MediaTek Inc.
> + */
> +
> +#include <linux/bitfield.h>
> +#include <linux/cpufreq.h>
> +#include <linux/energy_model.h>
> +#include <linux/init.h>
> +#include <linux/iopoll.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/of_address.h>
> +#include <linux/of_platform.h>
> +#include <linux/pm_qos.h>
You still need this ? Please check all the headers and keep only the ones that
are required.
> +#include <linux/slab.h>
> +
> +#define LUT_MAX_ENTRIES 32U
> +#define LUT_FREQ GENMASK(11, 0)
> +#define LUT_ROW_SIZE 0x4
> +#define CPUFREQ_HW_STATUS BIT(0)
> +#define SVS_HW_STATUS BIT(1)
> +#define POLL_USEC 1000
> +#define TIMEOUT_USEC 300000
> +
> +enum {
> + REG_FREQ_LUT_TABLE,
> + REG_FREQ_ENABLE,
> + REG_FREQ_PERF_STATE,
> + REG_FREQ_HW_STATE,
> + REG_EM_POWER_TBL,
> + REG_FREQ_LATENCY,
> +
> + REG_ARRAY_SIZE,
> +};
> +
> +struct mtk_cpufreq_data {
> + struct cpufreq_frequency_table *table;
> + void __iomem *reg_bases[REG_ARRAY_SIZE];
> + int nr_opp;
> +};
> +
> +static const u16 cpufreq_mtk_offsets[REG_ARRAY_SIZE] = {
> + [REG_FREQ_LUT_TABLE] = 0x0,
> + [REG_FREQ_ENABLE] = 0x84,
> + [REG_FREQ_PERF_STATE] = 0x88,
> + [REG_FREQ_HW_STATE] = 0x8c,
> + [REG_EM_POWER_TBL] = 0x90,
> + [REG_FREQ_LATENCY] = 0x110,
> +};
> +
> +static int __maybe_unused
> +mtk_cpufreq_get_cpu_power(unsigned long *mW,
> + unsigned long *KHz, struct device *cpu_dev)
> +{
> + struct mtk_cpufreq_data *data;
> + struct cpufreq_policy *policy;
> + int i;
> +
> + policy = cpufreq_cpu_get_raw(cpu_dev->id);
> + if (!policy)
> + return 0;
> +
> + data = policy->driver_data;
> +
> + for (i = 0; i < data->nr_opp; i++) {
> + if (data->table[i].frequency < *KHz)
> + break;
> + }
> + i--;
> +
> + *KHz = data->table[i].frequency;
> + *mW = readl_relaxed(data->reg_bases[REG_EM_POWER_TBL] +
> + i * LUT_ROW_SIZE) / 1000;
> +
> + return 0;
> +}
> +
> +static int mtk_cpufreq_hw_target_index(struct cpufreq_policy *policy,
> + unsigned int index)
> +{
> + struct mtk_cpufreq_data *data = policy->driver_data;
> +
> + writel_relaxed(index, data->reg_bases[REG_FREQ_PERF_STATE]);
> +
> + return 0;
> +}
> +
> +static unsigned int mtk_cpufreq_hw_get(unsigned int cpu)
> +{
> + struct mtk_cpufreq_data *data;
> + struct cpufreq_policy *policy;
> + unsigned int index;
> +
> + policy = cpufreq_cpu_get_raw(cpu);
> + if (!policy)
> + return 0;
> +
> + data = policy->driver_data;
> +
> + index = readl_relaxed(data->reg_bases[REG_FREQ_PERF_STATE]);
> + index = min(index, LUT_MAX_ENTRIES - 1);
> +
> + return data->table[index].frequency;
> +}
> +
> +static unsigned int mtk_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
> + unsigned int target_freq)
> +{
> + struct mtk_cpufreq_data *data = policy->driver_data;
> + unsigned int index;
> +
> + index = cpufreq_table_find_index_dl(policy, target_freq);
> +
> + writel_relaxed(index, data->reg_bases[REG_FREQ_PERF_STATE]);
> +
> + return policy->freq_table[index].frequency;
> +}
> +
> +static int mtk_cpu_create_freq_table(struct platform_device *pdev,
> + struct mtk_cpufreq_data *data)
> +{
> + struct device *dev = &pdev->dev;
> + void __iomem *base_table;
> + u32 temp, i, freq, prev_freq = 0;
> +
> + data->table = devm_kcalloc(dev, LUT_MAX_ENTRIES + 1,
> + sizeof(*data->table), GFP_KERNEL);
> + if (!data->table)
> + return -ENOMEM;
> +
> + base_table = data->reg_bases[REG_FREQ_LUT_TABLE];
> +
> + for (i = 0; i < LUT_MAX_ENTRIES; i++) {
> + temp = readl_relaxed(base_table + (i * LUT_ROW_SIZE));
> + freq = FIELD_GET(LUT_FREQ, temp) * 1000;
> +
> + if (freq == prev_freq)
> + break;
> +
> + data->table[i].frequency = freq;
> +
> + dev_dbg(dev, "index=%d freq=%d\n", i, data->table[i].frequency);
> +
> + prev_freq = freq;
> + }
> +
> + data->table[i].frequency = CPUFREQ_TABLE_END;
> + data->nr_opp = i;
> +
> + return 0;
> +}
> +
> +static int mtk_cpu_resources_init(struct platform_device *pdev,
> + struct cpufreq_policy *policy,
> + const u16 *offsets)
> +{
> + struct mtk_cpufreq_data *data;
> + struct device *dev = &pdev->dev;
> + void __iomem *base;
> + int ret, i;
> + int index;
> +
> + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
> + if (!data)
> + return -ENOMEM;
> +
> + index = of_perf_domain_get_sharing_cpumask(policy->cpu, "performance-domains",
> + "#performance-domain-cells",
> + policy->cpus);
No need to check failure here ?
> +
> + base = devm_platform_ioremap_resource(pdev, index);
> + if (IS_ERR(base))
> + return PTR_ERR(base);
> +
> + for (i = REG_FREQ_LUT_TABLE; i < REG_ARRAY_SIZE; i++)
> + data->reg_bases[i] = base + offsets[i];
> +
> + ret = mtk_cpu_create_freq_table(pdev, data);
> + if (ret) {
> + dev_info(dev, "Domain-%d failed to create freq table\n", index);
> + return ret;
> + }
> +
> + policy->freq_table = data->table;
> + policy->driver_data = data;
> +
> + return 0;
> +}
> +
> +static int mtk_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
> +{
> + struct em_data_callback em_cb = EM_DATA_CB(mtk_cpufreq_get_cpu_power);
> + struct platform_device *pdev = cpufreq_get_driver_data();
> + int sig, pwr_hw = CPUFREQ_HW_STATUS | SVS_HW_STATUS;
> + struct mtk_cpufreq_data *data;
> + struct device *cpu_dev;
> + unsigned int latency;
> + const u16 *offsets;
> + int ret;
> +
> + offsets = of_device_get_match_data(&pdev->dev);
> + if (!offsets)
> + return -EINVAL;
Do this in probe just once instead of for each policy ?
> +
> + /* Get the bases of cpufreq for domains */
> + ret = mtk_cpu_resources_init(pdev, policy, offsets);
> + if (ret) {
> + dev_info(&pdev->dev, "CPUFreq resource init failed\n");
> + return ret;
> + }
> +
> + data = policy->driver_data;
> +
> + latency = readl_relaxed(data->reg_bases[REG_FREQ_LATENCY]) * 1000;
> + if (!latency)
> + latency = CPUFREQ_ETERNAL;
> +
> + /* us convert to ns */
> + policy->cpuinfo.transition_latency = latency;
> +
> + policy->fast_switch_possible = true;
> +
> + /* HW should be in enabled state to proceed now */
> + writel_relaxed(0x1, data->reg_bases[REG_FREQ_ENABLE]);
> + if (readl_poll_timeout(data->reg_bases[REG_FREQ_HW_STATE], sig,
> + (sig & pwr_hw) == pwr_hw, POLL_USEC,
> + TIMEOUT_USEC)) {
> + if (!(sig & CPUFREQ_HW_STATUS)) {
> + pr_info("cpufreq hardware of CPU%d is not enabled\n",
> + policy->cpu);
> + return -ENODEV;
> + }
> +
> + pr_info("SVS of CPU%d is not enabled\n", policy->cpu);
> + }
> +
> + cpu_dev = get_cpu_device(policy->cpu);
> + if (!cpu_dev) {
> + pr_info("failed to get cpu%d device\n", policy->cpu);
> + return -ENODEV;
> + }
> +
> + em_dev_register_perf_domain(cpu_dev, data->nr_opp, &em_cb, policy->cpus,
> + true);
This needs to change based on the stuff present in my cpufreq/arm/linux-next [1]
branch. Here is the modification for a similar driver.
https://lore.kernel.org/linux-pm/8158488baa1ea1aebd09c8d256db7420051d05ac.1628742634.git.viresh.kumar@xxxxxxxxxx/
> +
> + return 0;
> +}
> +
> +static int mtk_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
> +{
> + struct mtk_cpufreq_data *data = policy->driver_data;
> + void __iomem *base;
> + int i;
> +
> + /* HW should be in paused state now */
> + writel_relaxed(0x0, data->reg_bases[REG_FREQ_ENABLE]);
> +
> + for (i = 0; i < REG_ARRAY_SIZE; i++) {
> + base = data->reg_bases[i];
> + iounmap(base);
> + }
> +
> + kfree(data->table);
> + kfree(data);
base, data and table are all allocated using devm_* variants. AFAIK, it is
wrong to free them this way as the devm core will try to do the same again
later. Try building your driver as module and insert remove it to see warnings.
Why do you need to free stuff here anyway if it is devm already ?
> +
> + return 0;
> +}
> +
> +static struct cpufreq_driver cpufreq_mtk_hw_driver = {
> + .flags = CPUFREQ_NEED_INITIAL_FREQ_CHECK |
> + CPUFREQ_HAVE_GOVERNOR_PER_POLICY |
> + CPUFREQ_IS_COOLING_DEV,
> + .verify = cpufreq_generic_frequency_table_verify,
> + .target_index = mtk_cpufreq_hw_target_index,
> + .get = mtk_cpufreq_hw_get,
> + .init = mtk_cpufreq_hw_cpu_init,
> + .exit = mtk_cpufreq_hw_cpu_exit,
> + .fast_switch = mtk_cpufreq_hw_fast_switch,
> + .name = "mtk-cpufreq-hw",
> + .attr = cpufreq_generic_attr,
> +};
> +
> +static int mtk_cpufreq_hw_driver_probe(struct platform_device *pdev)
> +{
> + int ret;
> +
> + cpufreq_mtk_hw_driver.driver_data = pdev;
> +
> + ret = cpufreq_register_driver(&cpufreq_mtk_hw_driver);
> + if (ret)
> + dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
> +
> + return ret;
> +}
> +
> +static int mtk_cpufreq_hw_driver_remove(struct platform_device *pdev)
> +{
> + return cpufreq_unregister_driver(&cpufreq_mtk_hw_driver);
> +}
> +
> +static const struct of_device_id mtk_cpufreq_hw_match[] = {
> + { .compatible = "mediatek,cpufreq-hw", .data = &cpufreq_mtk_offsets },
> + {}
> +};
> +
> +static struct platform_driver mtk_cpufreq_hw_driver = {
> + .probe = mtk_cpufreq_hw_driver_probe,
> + .remove = mtk_cpufreq_hw_driver_remove,
> + .driver = {
> + .name = "mtk-cpufreq-hw",
> + .of_match_table = mtk_cpufreq_hw_match,
> + },
> +};
> +module_platform_driver(mtk_cpufreq_hw_driver);
> +
> +MODULE_AUTHOR("Hector Yuan <hector.yuan@xxxxxxxxxxxx>");
> +MODULE_DESCRIPTION("Mediatek cpufreq-hw driver");
> +MODULE_LICENSE("GPL v2");
> --
> 1.7.9.5
--
viresh
[1] git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm.git
