Add multi pd support to set performance state for cx domain
to maintain minimum corner voltage for USB clocks.
Signed-off-by: Sandeep Maheswaram <sanm@xxxxxxxxxxxxxx>
---
drivers/usb/dwc3/dwc3-qcom.c | 49 ++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 49 insertions(+)
diff --git a/drivers/usb/dwc3/dwc3-qcom.c b/drivers/usb/dwc3/dwc3-qcom.c
index 9abbd01..777a647 100644
--- a/drivers/usb/dwc3/dwc3-qcom.c
+++ b/drivers/usb/dwc3/dwc3-qcom.c
@@ -17,6 +17,7 @@
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/phy/phy.h>
+#include <linux/pm_domain.h>
#include <linux/usb/of.h>
#include <linux/reset.h>
#include <linux/iopoll.h>
@@ -89,6 +90,10 @@ struct dwc3_qcom {
bool pm_suspended;
struct icc_path *icc_path_ddr;
struct icc_path *icc_path_apps;
+ /* power domain for cx */
+ struct device *pd_cx;
+ /* power domain for usb gdsc */
+ struct device *pd_usb_gdsc;
};
static inline void dwc3_qcom_setbits(void __iomem *base, u32 offset, u32 val)
@@ -521,6 +526,46 @@ static int dwc3_qcom_setup_irq(struct platform_device *pdev)
return 0;
}
+static int dwc3_qcom_attach_pd(struct device *dev)
+{
+ struct dwc3_qcom *qcom = dev_get_drvdata(dev);
+ struct device_link *link;
+
+ /* Do nothing when in a single power domain */
+ if (dev->pm_domain)
+ return 0;
+
+ qcom->pd_cx = dev_pm_domain_attach_by_name(dev, "cx");
+ if (IS_ERR(qcom->pd_cx))
+ return PTR_ERR(qcom->pd_cx);
+ /* Do nothing when power domain missing */
+ if (!qcom->pd_cx)
+ return 0;
+ link = device_link_add(dev, qcom->pd_cx,
+ DL_FLAG_STATELESS |
+ DL_FLAG_PM_RUNTIME |
+ DL_FLAG_RPM_ACTIVE);
+ if (!link) {
+ dev_err(dev, "Failed to add device_link to cx pd.\n");
+ return -EINVAL;
+ }
+
+ qcom->pd_usb_gdsc = dev_pm_domain_attach_by_name(dev, "usb_gdsc");
+ if (IS_ERR(qcom->pd_usb_gdsc))
+ return PTR_ERR(qcom->pd_usb_gdsc);
+
+ link = device_link_add(dev, qcom->pd_usb_gdsc,
+ DL_FLAG_STATELESS |
+ DL_FLAG_PM_RUNTIME |
+ DL_FLAG_RPM_ACTIVE);
+ if (!link) {
+ dev_err(dev, "Failed to add device_link to usb gdsc pd.\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
static int dwc3_qcom_clk_init(struct dwc3_qcom *qcom, int count)
{
struct device *dev = qcom->dev;
@@ -837,6 +882,10 @@ static int dwc3_qcom_probe(struct platform_device *pdev)
if (ret)
goto interconnect_exit;
+ ret = dwc3_qcom_attach_pd(dev);
+ if (ret)
+ goto interconnect_exit;
+
device_init_wakeup(&pdev->dev, 1);
qcom->is_suspended = false;
pm_runtime_set_active(dev);
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
