There's nothing magical about GPIO91 and boards could use different
GPIOs for card detect. Move the pin out of the dtsi file and to the
only existing board file.
Signed-off-by: Douglas Anderson <dianders@xxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 1 +
arch/arm64/boot/dts/qcom/sc7280.dtsi | 4 ----
2 files changed, 1 insertion(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 371a2a9dcf7a..ed9f9283b71d 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -336,6 +336,7 @@ data {
};
sd-cd {
+ pins = "gpio91";
bias-pull-up;
};
};
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 53a21d086178..99e946a33fbb 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -1573,10 +1573,6 @@ cmd {
data {
pins = "sdc2_data";
};
-
- sd-cd {
- pins = "gpio91";
- };
};
sdc2_off: sdc2-off {
--
2.33.0.259.gc128427fd7-goog
