Re: [PATCH 27/40] mfd: ti_am335x_tscadc: Move control register configuration

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Wed, 25 Aug 2021 17:25:05 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:

> The datasheet states that most of the configuration should be set in the
> control register in the first place, before actually enabling the
> hardware.

Reference always good. 

> So far only half of the configuration was made in the first
> step, which does not make really sense and would complicating the code
> when introducing support for the am437x hardware.
> 
> Let's move that register write a bit below to enclose more configuration.
> 
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Looks fine to me otherwise.

> ---
>  drivers/mfd/ti_am335x_tscadc.c | 3 ++-
>  1 file changed, 2 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index a40091830cea..1a30610dc65f 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -224,7 +224,6 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  	tscadc->ctrl = CNTRLREG_STEPID;
>  	if (tscadc->data->has_tsc) {
>  		tscadc->ctrl |= CNTRLREG_TSC_STEPCONFIGWRT;
> -		regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
>  		if (use_tsc) {
>  			tscadc->ctrl |= CNTRLREG_TSC_ENB;
>  			if (tscmag_wires == 5)
> @@ -235,6 +234,8 @@ static	int ti_tscadc_probe(struct platform_device *pdev)
>  
>  	}
>  
> +	regmap_write(tscadc->regmap, REG_CTRL, tscadc->ctrl);
> +
>  	tscadc_idle_config(tscadc);
>  
>  	/* Enable the TSC module enable bit */




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux