On Wed, 25 Aug 2021 17:24:51 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> The comment misses the main information which is that we assume that a
> sample takes 15 ADC clock cycles to be generated. Let's take the
> occasion to rework a little bit this comment.
>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Fair enough. It does seem a little clearer to me after your rewording.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
> ---
> drivers/mfd/ti_am335x_tscadc.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mfd/ti_am335x_tscadc.c b/drivers/mfd/ti_am335x_tscadc.c
> index 0fef35e1e64b..3afe22680973 100644
> --- a/drivers/mfd/ti_am335x_tscadc.c
> +++ b/drivers/mfd/ti_am335x_tscadc.c
> @@ -195,12 +195,12 @@ static int ti_tscadc_probe(struct platform_device *pdev)
> pm_runtime_get_sync(&pdev->dev);
>
> /*
> - * The TSC_ADC_Subsystem has 2 clock domains
> - * OCP_CLK and ADC_CLK.
> - * The ADC clock is expected to run at target of 3MHz,
> - * and expected to capture 12-bit data at a rate of 200 KSPS.
> - * The TSC_ADC_SS controller design assumes the OCP clock is
> - * at least 6x faster than the ADC clock.
> + * The TSC_ADC_Subsystem has 2 clock domains: OCP_CLK and ADC_CLK.
> + * ADCs produce a 12-bit sample every 15 ADC_CLK cycles.
> + * am33xx ADCs expect to capture 200ksps.
> + * We need the ADC clocks to run at 3MHz.
> + * This frequency is valid since TSC_ADC_SS controller design
> + * assumes the OCP clock is at least 6x faster than the ADC clock.
> */
> clk = devm_clk_get(&pdev->dev, "adc_tsc_fck");
> if (IS_ERR(clk)) {
