From: Doug Anderson <dianders@xxxxxxxxxxxx>
The EHCI and HSIC device tree nodes were added in the wrong place.
Fix them.
Signed-off-by: Doug Anderson <dianders@xxxxxxxxxxxx>
Signed-off-by: Kever Yang <kever.yang@xxxxxxxxxxxxxx>
---
Changes in v3:
- EHCI and HSIC move new for version 3.
Changes in v2: None
arch/arm/boot/dts/rk3288.dtsi | 41 ++++++++++++++++++++---------------------
1 file changed, 20 insertions(+), 21 deletions(-)
diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index a5607a1..673dee3 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -205,6 +205,17 @@
status = "disabled";
};
+ usb_host0_ehci: ehci@ff500000 {
+ compatible = "generic-ehci";
+ reg = <0xff500000 0x100>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USBHOST0>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
+ /* NOTE: ohci@ff520000 doesn't actually work on hardware */
+
usb_host1: usb@ff540000 {
compatible = "rockchip,rk3288-usb", "rockchip,rk3066-usb",
"snps,dwc2";
@@ -225,6 +236,15 @@
status = "disabled";
};
+ usb_hsic: ehci@ff5c0000 {
+ compatible = "generic-ehci";
+ reg = <0xff5c0000 0x100>;
+ interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HSIC>;
+ clock-names = "usbhost";
+ status = "disabled";
+ };
+
uart2: serial@ff690000 {
compatible = "rockchip,rk3288-uart", "snps,dw-apb-uart";
reg = <0xff690000 0x100>;
@@ -319,27 +339,6 @@
interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>;
status = "disabled";
};
-
- usb_host0_ehci: ehci@ff500000 {
- compatible = "generic-ehci";
- reg = <0xff500000 0x100>;
- interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_USBHOST0>;
- clock-names = "usbhost";
- status = "disabled";
- };
-
- /* NOTE: ohci@ff520000 doesn't actually work on hardware */
-
- usb_hsic: ehci@ff5c0000 {
- compatible = "generic-ehci";
- reg = <0xff5c0000 0x100>;
- interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&cru HCLK_HSIC>;
- clock-names = "usbhost";
- status = "disabled";
- };
-
gic: interrupt-controller@ffc01000 {
compatible = "arm,gic-400";
interrupt-controller;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
