Re: [PATCH v2 10/18] arm64: dts: qcom: sm6350: Add AOSS_QMP

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi,

On 8/28/2021 6:48 PM, Konrad Dybcio wrote:
Add a node for AOSS_QMP in preparation for remote processor enablement.

Signed-off-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxx>
---
  arch/arm64/boot/dts/qcom/sm6350.dtsi | 11 +++++++++++
  1 file changed, 11 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index 986d7fb01cbb..d903173b7dbc 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -537,6 +537,17 @@ tsens1: thermal-sensor@c265000 {
  			#thermal-sensor-cells = <1>;
  		};
+ aoss_qmp: power-controller@c300000 {
+			compatible = "qcom,sm6350-aoss-qmp", "qcom,aoss-qmp";
+			reg = <0 0x0c300000 0 0x1000>;

The QMP should only need 0x400 size [1].
Can you please change it so that when [1] goes in (and later when sleep stats enabled for sm6350 don't need to change size).

[1] https://patchwork.kernel.org/project/linux-arm-msm/patch/1621596371-26482-4-git-send-email-mkshah@xxxxxxxxxxxxxx/

Thanks,
Maulik

+			interrupts-extended = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP
+						     IRQ_TYPE_EDGE_RISING>;
+			mboxes = <&ipcc IPCC_CLIENT_AOP IPCC_MPROC_SIGNAL_GLINK_QMP>;
+
+			#clock-cells = <0>;
+			#power-domain-cells = <1>;
+		};
+
  		tlmm: pinctrl@f100000 {
  			compatible = "qcom,sm6350-tlmm";
  			reg = <0 0x0f100000 0 0x300000>;

--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux