[PATCH v4 4/9] dt-bindings: clock: cs2000-cp: document cirrus,dynamic-mode

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



This new flag exists to enable the dynamic mode of the hardware.
When not given, the static mode is used.

Signed-off-by: Daniel Mack <daniel@xxxxxxxxxx>
---
 .../devicetree/bindings/clock/cirrus,cs2000-cp.yaml       | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
index 9047d8a24a08..0abd6ba82dfd 100644
--- a/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
+++ b/Documentation/devicetree/bindings/clock/cirrus,cs2000-cp.yaml
@@ -54,6 +54,14 @@ properties:
       has missing pulses for up to 20 ms.
     $ref: /schemas/types.yaml#/definitions/flag
 
+  cirrus,dynamic-mode:
+    description:
+      In dynamic mode, the CLK_IN input is used to drive the
+      digital PLL of the silicon.
+      If not given, the static mode shall be used to derive the
+      output signal directly from the REF_CLK input.
+    $ref: /schemas/types.yaml#/definitions/flag
+
 required:
   - compatible
   - reg
-- 
2.31.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux