Re: [PATCH v12 0/6] PCI: mediatek: Spilt PCIe node to comply with hardware design

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, 23 Aug 2021 11:27:54 +0800, Chuanjia Liu wrote:
> There are two independent PCIe controllers in MT2712 and MT7622 platform.
> Each of them should contain an independent MSI domain.
> 
> In old dts architecture, MSI domain will be inherited from the root
> bridge, and all of the devices will share the same MSI domain.Hence that,
> the PCIe devices will not work properly if the irq number which required
> is more than 32.
> 
> [...]

Applied to pci/mediatek, thanks!

[1/4] dt-bindings: PCI: mediatek: Update the Device tree bindings
      https://git.kernel.org/lpieralisi/pci/c/aa6eca5b81
[2/4] PCI: mediatek: Add new method to get shared pcie-cfg base address
      https://git.kernel.org/lpieralisi/pci/c/87e8657ba9
[3/4] PCI: mediatek: Add new method to get irq number
      https://git.kernel.org/lpieralisi/pci/c/436960bb00
[4/4] PCI: mediatek: Use PCI domain to handle ports detection
      https://git.kernel.org/lpieralisi/pci/c/77216702c8

Thanks,
Lorenzo



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux