Re: [PATCH v16 5/7] usb: Specify dependencies on USB_XHCI_PLATFORM with 'depends on'

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 13/08/2021 22:52, Matthias Kaehlcke wrote:
> Some USB controller drivers that depend on the xhci-plat driver
> specify this dependency using 'select' in Kconfig. This is not
> recommended for symbols that have other dependencies as it may
> lead to invalid configurations. Use 'depends on' to specify the
> dependency instead of 'select'.
> 
> For dwc3 specify the dependency on USB_XHCI_PLATFORM in
> USB_DWC3_HOST and USB_DWC3_DUAL_ROLE. Also adjust the
> dependencies of USB_DWC3_CORE to make sure that at least one
> of USB_DWC3_HOST, USB_DWC3_GADGET or USB_DWC3_DUAL_ROLE can be
> selected.
> 
> Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>

Reviewed-by: Roger Quadros <rogerq@xxxxxxxxxx>

cheers,
-roger

> ---
> 
> Changes in v16:
> - none
> 
> Changes in v15:
> - adjusted dependencies of USB_DWC3_CORE to make sure it can only
>   be enabled when at least one of USB_DWC3_HOST, USB_DWC3_GADGET
>   or USB_DWC3_DUAL_ROLE is selectable
> - updated commit message
> 
> Changes in v14:
> - none
> 
> Changes in v13:
> - patch added to the series
> 
>  drivers/usb/cdns3/Kconfig | 2 +-
>  drivers/usb/dwc3/Kconfig  | 5 +++--
>  drivers/usb/host/Kconfig  | 4 ++--
>  3 files changed, 6 insertions(+), 5 deletions(-)
> 
> diff --git a/drivers/usb/cdns3/Kconfig b/drivers/usb/cdns3/Kconfig
> index b98ca0a1352a..07e12f786d48 100644
> --- a/drivers/usb/cdns3/Kconfig
> +++ b/drivers/usb/cdns3/Kconfig
> @@ -1,7 +1,7 @@
>  config USB_CDNS_SUPPORT
>  	tristate "Cadence USB Support"
>  	depends on USB_SUPPORT && (USB || USB_GADGET) && HAS_DMA
> -	select USB_XHCI_PLATFORM if USB_XHCI_HCD
> +	depends on !USB_XHCI_HCD || USB_XHCI_PLATFORM
>  	select USB_ROLE_SWITCH
>  	help
>  	  Say Y here if your system has a Cadence USBSS or USBSSP
> diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig
> index 66b1454c4db2..870f2251350a 100644
> --- a/drivers/usb/dwc3/Kconfig
> +++ b/drivers/usb/dwc3/Kconfig
> @@ -2,8 +2,7 @@
>  
>  config USB_DWC3
>  	tristate "DesignWare USB3 DRD Core Support"
> -	depends on (USB || USB_GADGET) && HAS_DMA
> -	select USB_XHCI_PLATFORM if USB_XHCI_HCD
> +	depends on ((USB && USB_XHCI_PLATFORM) || USB_GADGET) && HAS_DMA
>  	select USB_ROLE_SWITCH if USB_DWC3_DUAL_ROLE
>  	help
>  	  Say Y or M here if your system has a Dual Role SuperSpeed
> @@ -30,6 +29,7 @@ choice
>  config USB_DWC3_HOST
>  	bool "Host only mode"
>  	depends on USB=y || USB=USB_DWC3
> +	depends on USB_XHCI_PLATFORM
>  	help
>  	  Select this when you want to use DWC3 in host mode only,
>  	  thereby the gadget feature will be regressed.
> @@ -44,6 +44,7 @@ config USB_DWC3_GADGET
>  config USB_DWC3_DUAL_ROLE
>  	bool "Dual Role mode"
>  	depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
> +	depends on USB_XHCI_PLATFORM
>  	depends on (EXTCON=y || EXTCON=USB_DWC3)
>  	help
>  	  This is the default mode of working of DWC3 controller where
> diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig
> index df9428f1dc5e..518c2312ef0c 100644
> --- a/drivers/usb/host/Kconfig
> +++ b/drivers/usb/host/Kconfig
> @@ -80,7 +80,7 @@ config USB_XHCI_MTK
>  
>  config USB_XHCI_MVEBU
>  	tristate "xHCI support for Marvell Armada 375/38x/37xx"
> -	select USB_XHCI_PLATFORM
> +	depends on USB_XHCI_PLATFORM
>  	depends on HAS_IOMEM
>  	depends on ARCH_MVEBU || COMPILE_TEST
>  	help
> @@ -112,9 +112,9 @@ config USB_EHCI_BRCMSTB
>  config USB_BRCMSTB
>  	tristate "Broadcom STB USB support"
>  	depends on (ARCH_BRCMSTB && PHY_BRCM_USB) || COMPILE_TEST
> +	depends on !USB_XHCI_HCD || USB_XHCI_PLATFORM
>  	select USB_OHCI_HCD_PLATFORM if USB_OHCI_HCD
>  	select USB_EHCI_BRCMSTB if USB_EHCI_HCD
> -	select USB_XHCI_PLATFORM if USB_XHCI_HCD
>  	help
>  	  Enables support for XHCI, EHCI and OHCI host controllers
>  	  found in Broadcom STB SoC's.
> 



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux