[PATCH v4 1/2] dt-bindings: net: Add bindings for LiteETH

[Joel Stanley <joel@xxxxxxxxx>]

LiteETH is a small footprint and configurable Ethernet core for FPGA
based system on chips.

The hardware is parametrised by the size and number of the slots in it's
receive and send buffers. These are described as properties, with the
commonly used values set as the default.

Signed-off-by: Joel Stanley <joel@xxxxxxxxx>
---
v2:
 - Fix dtschema check warning relating to registers
 - Add names to the registers to make it easier to distinguish which is
   what region
 - Add mdio description
 - Include ethernet-controller parent description
v3:
 - Define names for reg-names
 - update example to match common case
 - describe the hardware using slots and slot sizes. This is how the
   hardware is pramaterised, and it makes more sense than trying to use
   the rx/tx-fifo-size properties
v4:
 - Don't need minItems if it is equal to 'items' length.
 - Add Rob's r-b
---
 .../bindings/net/litex,liteeth.yaml           | 98 +++++++++++++++++++
 1 file changed, 98 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/litex,liteeth.yaml

diff --git a/Documentation/devicetree/bindings/net/litex,liteeth.yaml b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
new file mode 100644
index 000000000000..76c164a8199a
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/litex,liteeth.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: GPL-2.0-or-later OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/litex,liteeth.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LiteX LiteETH ethernet device
+
+maintainers:
+  - Joel Stanley <joel@xxxxxxxxx>
+
+description: |
+  LiteETH is a small footprint and configurable Ethernet core for FPGA based
+  system on chips.
+
+  The hardware source is Open Source and can be found on at
+  https://github.com/enjoy-digital/liteeth/.
+
+allOf:
+  - $ref: ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: litex,liteeth
+
+  reg:
+    items:
+      - description: MAC registers
+      - description: MDIO registers
+      - description: Packet buffer
+
+  reg-names:
+    items:
+      - const: mac
+      - const: mdio
+      - const: buffer
+
+  interrupts:
+    maxItems: 1
+
+  litex,rx-slots:
+    description: Number of slots in the receive buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,tx-slots:
+    description: Number of slots in the transmit buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    default: 2
+
+  litex,slot-size:
+    description: Size in bytes of a slot in the tx/rx buffer
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 0x800
+    default: 0x800
+
+  mac-address: true
+  local-mac-address: true
+  phy-handle: true
+
+  mdio:
+    $ref: mdio.yaml#
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    mac: ethernet@8020000 {
+        compatible = "litex,liteeth";
+        reg = <0x8021000 0x100>,
+              <0x8020800 0x100>,
+              <0x8030000 0x2000>;
+        reg-names = "mac", "mdio", "buffer";
+        litex,rx-slots = <2>;
+        litex,tx-slots = <2>;
+        litex,slot-size = <0x800>;
+        interrupts = <0x11 0x1>;
+        phy-handle = <&eth_phy>;
+
+        mdio {
+          #address-cells = <1>;
+          #size-cells = <0>;
+
+          eth_phy: ethernet-phy@0 {
+            reg = <0>;
+          };
+        };
+    };
+...
+
+#  vim: set ts=2 sw=2 sts=2 tw=80 et cc=80 ft=yaml :
-- 
2.33.0