This patch use devm_add_action_or_reset to handle the error in probe phase. Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> --- drivers/iio/adc/aspeed_adc.c | 92 +++++++++++++++++++++--------------- 1 file changed, 55 insertions(+), 37 deletions(-) diff --git a/drivers/iio/adc/aspeed_adc.c b/drivers/iio/adc/aspeed_adc.c index 52db38be9699..1c87e12a0cab 100644 --- a/drivers/iio/adc/aspeed_adc.c +++ b/drivers/iio/adc/aspeed_adc.c @@ -187,6 +187,27 @@ static const struct iio_info aspeed_adc_iio_info = { .debugfs_reg_access = aspeed_adc_reg_access, }; +static void aspeed_adc_unregister_divider(void *data) +{ + struct clk_hw *clk = data; + + clk_hw_unregister_divider(clk); +} + +static void aspeed_adc_reset_assert(void *data) +{ + struct reset_control *rst = data; + + reset_control_assert(rst); +} + +static void aspeed_adc_clk_disable_unprepare(void *data) +{ + struct clk *clk = data; + + clk_disable_unprepare(clk); +} + static int aspeed_adc_vref_config(struct iio_dev *indio_dev) { struct aspeed_adc_data *data = iio_priv(indio_dev); @@ -232,6 +253,12 @@ static int aspeed_adc_probe(struct platform_device *pdev) &data->clk_lock); if (IS_ERR(data->clk_prescaler)) return PTR_ERR(data->clk_prescaler); + + ret = devm_add_action_or_reset(data->dev, + aspeed_adc_unregister_divider, + data->clk_prescaler); + if (ret) + return ret; snprintf(clk_parent_name, 32, clk_name); scaler_flags = CLK_SET_RATE_PARENT; } @@ -244,23 +271,30 @@ static int aspeed_adc_probe(struct platform_device *pdev) &pdev->dev, clk_name, clk_parent_name, scaler_flags, data->base + ASPEED_REG_CLOCK_CONTROL, 0, data->model_data->scaler_bit_width, 0, &data->clk_lock); - if (IS_ERR(data->clk_scaler)) { - ret = PTR_ERR(data->clk_scaler); - goto scaler_error; - } + if (IS_ERR(data->clk_scaler)) + return PTR_ERR(data->clk_scaler); + + ret = devm_add_action_or_reset(data->dev, aspeed_adc_unregister_divider, + data->clk_scaler); + if (ret) + return ret; data->rst = devm_reset_control_get_exclusive(&pdev->dev, NULL); if (IS_ERR(data->rst)) { dev_err(&pdev->dev, "invalid or missing reset controller device tree entry"); - ret = PTR_ERR(data->rst); - goto reset_error; + return PTR_ERR(data->rst); } reset_control_deassert(data->rst); + ret = devm_add_action_or_reset(data->dev, aspeed_adc_reset_assert, + data->rst); + if (ret) + return ret; + ret = aspeed_adc_vref_config(indio_dev); if (ret) - goto vref_config_error; + return ret; if (data->model_data->wait_init_sequence) { /* Enable engine in normal mode. */ @@ -277,13 +311,19 @@ static int aspeed_adc_probe(struct platform_device *pdev) ASPEED_ADC_INIT_POLLING_TIME, ASPEED_ADC_INIT_TIMEOUT); if (ret) - goto poll_timeout_error; + return ret; } /* Start all channels in normal mode. */ ret = clk_prepare_enable(data->clk_scaler->clk); if (ret) - goto clk_enable_error; + return ret; + + ret = devm_add_action_or_reset(data->dev, + aspeed_adc_clk_disable_unprepare, + data->clk_scaler->clk); + if (ret) + return ret; adc_engine_control_reg_val = ASPEED_ADC_CTRL_CHANNEL | @@ -299,41 +339,19 @@ static int aspeed_adc_probe(struct platform_device *pdev) indio_dev->num_channels = data->model_data->num_channels; ret = iio_device_register(indio_dev); - if (ret) - goto iio_register_error; - + if (ret) { + writel(FIELD_PREP(ASPEED_ADC_OP_MODE, + ASPEED_ADC_OP_MODE_PWR_DOWN), + data->base + ASPEED_REG_ENGINE_CONTROL); + return ret; + } return 0; - -iio_register_error: - writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN), - data->base + ASPEED_REG_ENGINE_CONTROL); - clk_disable_unprepare(data->clk_scaler->clk); -clk_enable_error: -poll_timeout_error: -vref_config_error: - reset_control_assert(data->rst); -reset_error: - clk_hw_unregister_divider(data->clk_scaler); -scaler_error: - if (data->model_data->need_prescaler) - clk_hw_unregister_divider(data->clk_prescaler); - return ret; } static int aspeed_adc_remove(struct platform_device *pdev) { struct iio_dev *indio_dev = platform_get_drvdata(pdev); - struct aspeed_adc_data *data = iio_priv(indio_dev); - iio_device_unregister(indio_dev); - writel(FIELD_PREP(ASPEED_ADC_OP_MODE, ASPEED_ADC_OP_MODE_PWR_DOWN), - data->base + ASPEED_REG_ENGINE_CONTROL); - clk_disable_unprepare(data->clk_scaler->clk); - reset_control_assert(data->rst); - clk_hw_unregister_divider(data->clk_scaler); - if (data->model_data->need_prescaler) - clk_hw_unregister_divider(data->clk_prescaler); - return 0; } -- 2.25.1