On Mon, 16 Aug 2021 at 15:00, <haibo.chen@xxxxxxx> wrote: > > From: Haibo Chen <haibo.chen@xxxxxxx> > > For manual tuning method, already call esdhc_prepare_tuning() > config the necessary registers, so remove the redundant code > in esdhc_writew_le() for SDHCI_HOST_CONTROL2. > > Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx> While discussions on the DT binding, etc, continue with Lucas and Rob on patch 3 - do you want me to apply patch1 and patch2? Kind regards Uffe > --- > drivers/mmc/host/sdhci-esdhc-imx.c | 12 +----------- > 1 file changed, 1 insertion(+), 11 deletions(-) > > diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c > index 57b19ca1ad6d..a49fac719fca 100644 > --- a/drivers/mmc/host/sdhci-esdhc-imx.c > +++ b/drivers/mmc/host/sdhci-esdhc-imx.c > @@ -628,17 +628,7 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) > else > new_val &= ~ESDHC_VENDOR_SPEC_VSELECT; > writel(new_val, host->ioaddr + ESDHC_VENDOR_SPEC); > - if (imx_data->socdata->flags & ESDHC_FLAG_MAN_TUNING) { > - new_val = readl(host->ioaddr + ESDHC_MIX_CTRL); > - if (val & SDHCI_CTRL_TUNED_CLK) { > - new_val |= ESDHC_MIX_CTRL_SMPCLK_SEL; > - new_val |= ESDHC_MIX_CTRL_AUTO_TUNE_EN; > - } else { > - new_val &= ~ESDHC_MIX_CTRL_SMPCLK_SEL; > - new_val &= ~ESDHC_MIX_CTRL_AUTO_TUNE_EN; > - } > - writel(new_val , host->ioaddr + ESDHC_MIX_CTRL); > - } else if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { > + if (imx_data->socdata->flags & ESDHC_FLAG_STD_TUNING) { > u32 v = readl(host->ioaddr + SDHCI_AUTO_CMD_STATUS); > u32 m = readl(host->ioaddr + ESDHC_MIX_CTRL); > if (val & SDHCI_CTRL_TUNED_CLK) { > -- > 2.17.1 >