Add device tree bindings document for the aspeed ast2600 adc device driver. Signed-off-by: Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> --- .../bindings/iio/adc/aspeed,ast2600-adc.yaml | 97 +++++++++++++++++++ 1 file changed, 97 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml diff --git a/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml new file mode 100644 index 000000000000..248cda7d91e9 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/aspeed,ast2600-adc.yaml @@ -0,0 +1,97 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/iio/adc/aspeed,ast2600-adc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ADC that forms part of an ASPEED server management processor. + +maintainers: + - Billy Tsai <billy_tsai@xxxxxxxxxxxxxx> + +description: | + • 10-bits resolution for 16 voltage channels. + • The device split into two individual engine and each contains 8 voltage + channels. + • Channel scanning can be non-continuous. + • Programmable ADC clock frequency. + • Programmable upper and lower threshold for each channels. + • Interrupt when larger or less than threshold for each channels. + • Support hysteresis for each channels. + • Built-in a compensating method. + • Built-in a register to trim internal reference voltage. + • Internal or External reference voltage. + • Support 2 Internal reference voltage 1.2v or 2.5v. + • Integrate dividing circuit for battery sensing. + +properties: + compatible: + enum: + - aspeed,ast2600-adc0 + - aspeed,ast2600-adc1 + + reg: + maxItems: 1 + + clocks: + description: + Input clock used to derive the sample clock. Expected to be the + SoC's APB clock. + + resets: + maxItems: 1 + + "#io-channel-cells": + const: 1 + + vref-supply: + description: + The external regulator supply ADC reference voltage. + + aspeed,int_vref_mv: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [1200, 2500] + description: + ADC internal reference voltage in millivolts. + + aspeed,battery-sensing: + type: boolean + description: + Inform the driver that last channel will be used to sensor battery. + + aspeed,trim-data-valid: + type: boolean + description: | + The ADC reference voltage can be calibrated to obtain the trimming + data which will be stored in otp. This property informs the driver that + the data store in the otp is valid. + +required: + - compatible + - reg + - clocks + - resets + - "#io-channel-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/ast2600-clock.h> + adc0: adc@1e6e9000 { + compatible = "aspeed,ast2600-adc0"; + reg = <0x1e6e9000 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; + adc1: adc@1e6e9100 { + compatible = "aspeed,ast2600-adc1"; + reg = <0x1e6e9100 0x100>; + clocks = <&syscon ASPEED_CLK_APB2>; + resets = <&syscon ASPEED_RESET_ADC>; + #io-channel-cells = <1>; + aspeed,int_vref_mv = <2500>; + }; +... -- 2.25.1
