extends the owl loader to fetch important pci initialization
values - which are stored together with the calibration data -
through the nvmem subsystem.
This allows for much faster WIFI/ath9k initializations on devices
that do not require to perform any post-processing (like XOR'ing/
reversal or unpacking) since no userspace helper is required.
Signed-off-by: Christian Lamparter <chunkeey@xxxxxxxxx>
---
.../wireless/ath/ath9k/ath9k_pci_owl_loader.c | 105 +++++++++++++-----
1 file changed, 76 insertions(+), 29 deletions(-)
diff --git a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
index 56d1a7764b9f..708c8969b503 100644
--- a/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
+++ b/drivers/net/wireless/ath/ath9k/ath9k_pci_owl_loader.c
@@ -19,9 +19,14 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/ath9k_platform.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/workqueue.h>
struct owl_ctx {
+ struct pci_dev *pdev;
struct completion eeprom_load;
+ struct work_struct work;
+ struct nvmem_cell *cell;
};
#define EEPROM_FILENAME_LEN 100
@@ -42,6 +47,12 @@ static int ath9k_pci_fixup(struct pci_dev *pdev, const u16 *cal_data,
u32 bar0;
bool swap_needed = false;
+ /* also note that we are doing *u16 operations on the file */
+ if (cal_len > 4096 || cal_len < 0x200 || (cal_len & 1) == 1) {
+ dev_err(&pdev->dev, "eeprom has an invalid size.\n");
+ return -EINVAL;
+ }
+
if (*cal_data != AR5416_EEPROM_MAGIC) {
if (*cal_data != swab16(AR5416_EEPROM_MAGIC)) {
dev_err(&pdev->dev, "invalid calibration data\n");
@@ -99,38 +110,31 @@ static int ath9k_pci_fixup(struct pci_dev *pdev, const u16 *cal_data,
return 0;
}
-static void owl_fw_cb(const struct firmware *fw, void *context)
+static void owl_rescan(struct pci_dev *pdev)
{
- struct pci_dev *pdev = (struct pci_dev *)context;
- struct owl_ctx *ctx = (struct owl_ctx *)pci_get_drvdata(pdev);
- struct pci_bus *bus;
-
- complete(&ctx->eeprom_load);
-
- if (!fw) {
- dev_err(&pdev->dev, "no eeprom data received.\n");
- goto release;
- }
-
- /* also note that we are doing *u16 operations on the file */
- if (fw->size > 4096 || fw->size < 0x200 || (fw->size & 1) == 1) {
- dev_err(&pdev->dev, "eeprom file has an invalid size.\n");
- goto release;
- }
-
- if (ath9k_pci_fixup(pdev, (const u16 *)fw->data, fw->size))
- goto release;
+ struct pci_bus *bus = pdev->bus;
pci_lock_rescan_remove();
- bus = pdev->bus;
pci_stop_and_remove_bus_device(pdev);
/* the device should come back with the proper
* ProductId. But we have to initiate a rescan.
*/
pci_rescan_bus(bus);
pci_unlock_rescan_remove();
+}
+
+static void owl_fw_cb(const struct firmware *fw, void *context)
+{
+ struct owl_ctx *ctx = (struct owl_ctx *)context;
+
+ complete(&ctx->eeprom_load);
-release:
+ if (fw) {
+ ath9k_pci_fixup(ctx->pdev, (const u16 *)fw->data, fw->size);
+ owl_rescan(ctx->pdev);
+ } else {
+ dev_err(&ctx->pdev->dev, "no eeprom data received.\n");
+ }
release_firmware(fw);
}
@@ -152,6 +156,43 @@ static const char *owl_get_eeprom_name(struct pci_dev *pdev)
return eeprom_name;
}
+static void owl_nvmem_work(struct work_struct *work)
+{
+ struct owl_ctx *ctx = container_of(work, struct owl_ctx, work);
+ void *buf;
+ size_t len;
+
+ complete(&ctx->eeprom_load);
+
+ buf = nvmem_cell_read(ctx->cell, &len);
+ if (!IS_ERR(buf)) {
+ ath9k_pci_fixup(ctx->pdev, buf, len);
+ kfree(buf);
+ owl_rescan(ctx->pdev);
+ } else {
+ dev_err(&ctx->pdev->dev, "no nvmem data received.\n");
+ }
+}
+
+static int owl_nvmem_probe(struct owl_ctx *ctx)
+{
+ int err;
+
+ ctx->cell = devm_nvmem_cell_get(&ctx->pdev->dev, "calibration");
+ if (IS_ERR(ctx->cell)) {
+ err = PTR_ERR(ctx->cell);
+ if (err == -ENOENT || err == -EOPNOTSUPP)
+ return 1; /* not present, try firmware_request */
+
+ return err;
+ }
+
+ INIT_WORK(&ctx->work, owl_nvmem_work);
+ schedule_work(&ctx->work);
+
+ return 0;
+}
+
static int owl_probe(struct pci_dev *pdev,
const struct pci_device_id *id)
{
@@ -164,21 +205,27 @@ static int owl_probe(struct pci_dev *pdev,
pcim_pin_device(pdev);
- eeprom_name = owl_get_eeprom_name(pdev);
- if (!eeprom_name) {
- dev_err(&pdev->dev, "no eeprom filename found.\n");
- return -ENODEV;
- }
-
ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL);
if (!ctx)
return -ENOMEM;
init_completion(&ctx->eeprom_load);
+ ctx->pdev = pdev;
pci_set_drvdata(pdev, ctx);
+
+ err = owl_nvmem_probe(ctx);
+ if (err <= 0)
+ return err;
+
+ eeprom_name = owl_get_eeprom_name(pdev);
+ if (!eeprom_name) {
+ dev_err(&pdev->dev, "no eeprom filename found.\n");
+ return -ENODEV;
+ }
+
err = request_firmware_nowait(THIS_MODULE, true, eeprom_name,
- &pdev->dev, GFP_KERNEL, pdev, owl_fw_cb);
+ &pdev->dev, GFP_KERNEL, ctx, owl_fw_cb);
if (err)
dev_err(&pdev->dev, "failed to request caldata (%d).\n", err);
--
2.33.0
