[PATCH V2] dt-bindings: net: brcm,unimac-mdio: convert to the json-schema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Rafał Miłecki <rafal@xxxxxxxxxx>

This helps validating DTS files.

Introduced example binding changes:
1. Fixed reg formatting
2. Swapped #address-cells and #size-cells incorrect values
3. Renamed node: s/phy/ethernet-phy/

Signed-off-by: Rafał Miłecki <rafal@xxxxxxxxxx>
---
I've verified this new binding using:
make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml

V2: Fix typo: s/Tnterrupt/Interrupt/ - thanks Andrew
---
 .../bindings/net/brcm,unimac-mdio.txt         | 43 ----------
 .../bindings/net/brcm,unimac-mdio.yaml        | 84 +++++++++++++++++++
 2 files changed, 84 insertions(+), 43 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
 create mode 100644 Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml

diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
deleted file mode 100644
index e15589f47787..000000000000
--- a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-* Broadcom UniMAC MDIO bus controller
-
-Required properties:
-- compatible: should one from "brcm,genet-mdio-v1", "brcm,genet-mdio-v2",
-  "brcm,genet-mdio-v3", "brcm,genet-mdio-v4", "brcm,genet-mdio-v5" or
-  "brcm,unimac-mdio"
-- reg: address and length of the register set for the device, first one is the
-  base register, and the second one is optional and for indirect accesses to
-  larger than 16-bits MDIO transactions
-- reg-names: name(s) of the register must be "mdio" and optional "mdio_indir_rw"
-- #size-cells: must be 1
-- #address-cells: must be 0
-
-Optional properties:
-- interrupts: must be one if the interrupt is shared with the Ethernet MAC or
-  Ethernet switch this MDIO block is integrated from, or must be two, if there
-  are two separate interrupts, first one must be "mdio done" and second must be
-  for "mdio error"
-- interrupt-names: must be "mdio_done_error" when there is a share interrupt fed
-  to this hardware block, or must be "mdio_done" for the first interrupt and
-  "mdio_error" for the second when there are separate interrupts
-- clocks: A reference to the clock supplying the MDIO bus controller
-- clock-frequency: the MDIO bus clock that must be output by the MDIO bus
-  hardware, if absent, the default hardware values are used
-
-Child nodes of this MDIO bus controller node are standard Ethernet PHY device
-nodes as described in Documentation/devicetree/bindings/net/phy.txt
-
-Example:
-
-mdio@403c0 {
-	compatible = "brcm,unimac-mdio";
-	reg = <0x403c0 0x8 0x40300 0x18>;
-	reg-names = "mdio", "mdio_indir_rw";
-	#size-cells = <1>;
-	#address-cells = <0>;
-
-	...
-	phy@0 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0>;
-	};
-};
diff --git a/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
new file mode 100644
index 000000000000..f4f4c37f1d4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/brcm,unimac-mdio.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/brcm,unimac-mdio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom UniMAC MDIO bus controller
+
+maintainers:
+  - Rafał Miłecki <rafal@xxxxxxxxxx>
+
+allOf:
+  - $ref: mdio.yaml#
+
+properties:
+  compatible:
+    enum:
+      - brcm,genet-mdio-v1
+      - brcm,genet-mdio-v2
+      - brcm,genet-mdio-v3
+      - brcm,genet-mdio-v4
+      - brcm,genet-mdio-v5
+      - brcm,unimac-mdio
+
+  reg:
+    minItems: 1
+    items:
+      - description: base register
+      - description: indirect accesses to larger than 16-bits MDIO transactions
+
+  reg-names:
+    minItems: 1
+    items:
+      - const: mdio
+      - const: mdio_indir_rw
+
+  interrupts:
+    oneOf:
+      - description: >
+          Interrupt shared with the Ethernet MAC or Ethernet switch this MDIO
+          block is integrated from
+      - items:
+          - description: |
+              "mdio done" interrupt
+          - description: |
+              "mdio error" interrupt
+
+  interrupt-names:
+    oneOf:
+      - const: mdio_done_error
+      - items:
+          - const: mdio_done
+          - const: mdio_error
+
+  clocks:
+    description: A reference to the clock supplying the MDIO bus controller
+
+  clock-frequency:
+    description: >
+      The MDIO bus clock that must be output by the MDIO bus hardware, if
+      absent, the default hardware values are used
+
+unevaluatedProperties: false
+
+required:
+  - reg
+  - reg-names
+  - '#address-cells'
+  - '#size-cells'
+
+examples:
+  - |
+    mdio@403c0 {
+        compatible = "brcm,unimac-mdio";
+        reg = <0x403c0 0x8>, <0x40300 0x18>;
+        reg-names = "mdio", "mdio_indir_rw";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        ethernet-phy@0 {
+            compatible = "ethernet-phy-ieee802.3-c22";
+            reg = <0>;
+        };
+    };
-- 
2.26.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux